Battery Chargers

Powerhouse 24000mAh 2400A Lithium Jumpstarter Pack – High-Performance Power for Vehicles & Devices Be ready for anything on the road with the Powerhouse 24000mAh 2400A Lithium Jumpstarter Pack—a rugged, multi-functional power solution designed to jumpstart 12V petrol and diesel vehicles, charge your laptops and devices, and power 12V appliances when you're off-grid. Compact yet incredibly powerful, this lithium polymer battery pack delivers a 2400A peak current, making it ideal for 4, 6, and 8-cylinder engines, including diesel-powered cars, utes, and agricultural machinery. Whether you're on a remote worksite or off-the-beaten-track with your camper or 4WD, this is the ultimate all-in-one jumpstarter and power bank. Key Features: High-Capacity Power Bank – 24,000mAh (88.8Wh) internal lithium-polymer battery Jump Starts Petrol & Diesel Vehicles – Up to 2400A peak output, suitable for 12V batteries 90W USB-C PD Input/Output – Fast recharge and laptop-grade output for devices or even Starlink Mini Dish Versatile Charging – Dual USB outputs (QC 3.0 + 5V/2.4A) for phones, tablets & more  12V DC Output – Power fridges, lights, and other accessories with included car socket adapter Heavy-Duty Clamps – Built to handle tough starting conditions Built-In LED Torch – 1W torch with emergency lighting capabilities Portable Carry Case – Durable zip-up case for all included accessories Package Includes: 1 x Car Jumpstarter 1 x Carry Bag 1 x Car Accessory Socket to DC Jack Adapter 1 x Smart Battery Clamp Plug 1 x USB Type-C Charging Cable 1 x Instruction Manual Specifications: Battery Capacity: 24,000mAh (88.8Wh) Start Current: 800–1200A Peak Current: 1600–2400A Battery Type: Lithium Polymer (4S) System Voltage: 12V Operating Temperature: -20°C to 60°C Charging Input: USB Type-C PD (Max 90W) Charging Outputs: USB-C PD (90W max) USB-A QC3.0 (18W) USB-A 5V/2.4A 12V DC via included adapter Dimensions: 240 x 138 x 50mm Torch: 1W LED Ideal For: Emergency vehicle jump-starting Camping & 4WD adventures Off-grid living & remote worksites Powering fridges, fans, lights, and communication gear Stay charged and in control—on the road or off it.Grab the Powerhouse 24000mAh Jumpstarter Pack and never get caught flat again.

Read more less

MP3768 is a 12V/24V 30A MPPT solar charge controller with an LCD display, designed for rechargeable lead-acid and lithium batteries. It features dual-level MPPT technology and a wide range of input voltage for optimal power utilization and improved system efficiency up to 99%. Get reliable, efficient charging for the ultimate solar power harvesting. Features: Advanced MPPT control technology High tracking and conversion efficiency Supports Sealed, Gel or flooded lead acid and Lithium batteries 3-stage intelligent charging Multiple load work modes Extensive electronic protection Backlit LCD display RS485 communication Common negative grounding A intelligent 3 stage compact MPPT solar charge controller. Supports 390W at 12V or 24VDC arrays up to 780W. Specifications: Compatible Battery Bank Voltages 12 / 24VDC Selectable  Solar Input Voltage: 16 - 100VDC Maximum Solar Array Size: 580W/12VDC , 1170W / 24VDC  Maximum Charge Output: 30A  Maximum Load Current: 30A  Dimensions: 228(H) x 164(W) x 55(D)mm, 1.26kg Battery support: Sealed, gel or flooded Lead-acid (8~17V/12V; 18~32V/24V) LiFePO4 (12V/24V) LiNiCoMnO2 (12V/24V) LiFePO4 (12V/24V) LiNiCoMnO2 (12V/24V) Specifications Packaged Volume : 3.65l Packaged Weight : 1.44kg Packaged Length : 25.5cm Packaged Width : 18.6cm Packaged Height : 7.7cm Length : 228mm Width : 164mm Height : 55mm Weight : 1260g Max Solar Panel Array : 390W, 780W Max PV Open Circuit Voltage : 100V Max Charging Current : 30A Charge Controller Technology : Maximum Power Point Tracking (MPPT)

Read more less

High-Capacity Lithium Battery Jumpstarter & Portable USB Power Bank Designed for: Jumpstarting 12V battery-equipped vehicles, including cars, 4WDs, and agricultural equipment, and charging devices on the go. Overview This ultra-compact lithium battery jump starter is engineered to provide high power in a small package. Capable of delivering a peak output of 2500A, it is perfect for jumpstarting 4, 6, and 8-cylinder engines, including diesel. Its compact design (weighing less than 700g) makes it significantly smaller than traditional jump starters, offering ultimate portability without sacrificing performance. Key Features Powerful Output: Delivers a peak current of 2500A for quick jumpstarts. Portable Power Bank: Functions as a high-capacity USB battery bank, ideal for charging smartphones, tablets, and other devices away from mains power. Versatile DC Output: Comes with a cigarette lighter socket adapter, allowing you to power 12V appliances like car fridges and lights. Fast Charging: Includes USB Type-C input for rapid recharging with any standard USB wall or vehicle charger (up to 18W PD charging). Compact & Lightweight: Weighing under 700g, it’s easily portable and stored in a durable zippered carrying case for protection on the go. Package Contents 1 x Lithium Car Jumpstarter (M8195B) 1 x Carry Bag 1 x DC to Car Accessory Socket Adapter 1 x Smart Battery Clamp Plug 1 x USB Type-C Charging Cable 1 x Instruction Manual Specifications Battery Capacity: 20000mAh Start Current: 1000A Peak Current: 2500A USB Type-C Input: 5V/3A, 18W Dual USB Outputs: 5V/3A 9V/2A 12V/1.5A DC Output: 12V/10A Working Temperature Range: -20°C to +60°C Weight: 890g Dimensions: 192 x 90 x 36 mm Important Usage Notes Charge Before Use: Ensure the battery is fully charged prior to the first use. Maintenance: To maintain optimal performance, recharge the battery every 6 months. Additional Features 1W LED Torch: Ideal for nighttime visibility and emergencies. Durable Battery Clamps: Includes heavy-duty crocodile clamps for secure connections. Dual USB Charging Ports: Charges two devices simultaneously at 5V/3A each, ensuring devices stay powered up wherever you go. This versatile lithium jump starter and power bank combo offers everything you need to stay powered up on the road, from jumpstarting your vehicle to charging essential electronics.

Read more less

Powerhouse 12V 7Ah Sealed Lead Acid (SLA) Battery – F1 4.8mm Reliable Backup Power for UPS, Alarms, Communications & Emergency Systems Dependable 12V Backup Power The Powerhouse 12V 7Ah Sealed Lead Acid (SLA) Battery is a compact and reliable power solution designed for UPS systems, alarm panels, communications equipment, emergency lighting, and medical devices. Built with sealed lead acid technology, it offers maintenance-free operation, safe non-spillable construction, and dependable standby performance. Fitted with 4.8mm F1 spade terminals, this battery allows quick and simple replacement in compatible equipment, ensuring your essential systems remain powered when needed. Key Features 12V 7Ah Capacity – Ideal for standby and backup power applications Sealed Lead Acid (SLA) Construction – Maintenance-free and spill-proof 4.8mm F1 Spade Terminals – Easy installation and replacement UPS Grade Cells – Designed for reliable standby operation Durable ABS Housing – Impact-resistant and built for long service life Low Internal Resistance – Provides stable and efficient power output ActivFire Listed (afp3824) – Suitable for compliant fire and safety systems IEC Certified – Conforms to IEC 60896-21:2004 and IEC 60896-22:2004 Ideal Applications UPS (Uninterruptible Power Supply) systems Alarm and security systems Communications equipment Emergency lighting systems Medical devices Backup power systems Technical Specifications General Nominal Voltage: 12V Capacity: 7Ah (20-hour rate) Terminal Type: F1 / 4.8mm spade Container Material: ABS Battery Life: 3–5 years (standby use) Weight: 2kg Electrical Internal Resistance: ~28mΩ Max Discharge Current: 70A (5 seconds) Charging Characteristics Charging Voltage: 14.4V – 15V Float Charging Voltage: 13.5V – 13.8V Maximum Charging Current: 2.1A Temperature Range Charging: 0°C to 40°C Discharging: -15°C to 50°C Storage: -15°C to 40°C Dimensions Length: 151mm Width: 65mm Height (including terminals): 102mm Important Notes Not suitable for engine bays. Temperatures above 65°C may affect the ABS housing. Ensure the battery is used in a well-ventilated environment to prevent overheating. Warranty 12 Month Manufacturer's warranty from the date of purchase.  Why Choose Powerhouse SLA Batteries? Powerhouse SLA batteries are sourced from reliable manufacturers and graded for UPS and standby applications. Compared to cheaper alternatives, they offer longer service life, stable performance, and dependable backup power when it matters most.

Read more less

Powerhouse 20A DC to DC Dual Battery Charger with MPPT Solar Input Efficient Dual Battery Charging for 4WD, Camping & Off-Grid Power The Powerhouse 20A DC to DC Battery Charger is the ideal in-vehicle power solution for 4WDs, caravans, marine setups, and off-grid applications. Designed to keep your auxiliary battery charged from both your vehicle’s alternator and solar panels, this intelligent charger ensures efficient and safe power management. With MPPT (Maximum Power Point Tracking) solar input, it maximizes charging efficiency, even in varying sunlight conditions. Built with rugged aluminum housing and advanced electronic protection, the Powerhouse 20A charger offers fully automatic multi-stage charging, preventing overcharging while extending battery life. The smart battery isolation system ensures that your main battery remains protected, so you never get stranded. Key Features & Benefits ✔ 20A DC to DC Charging – Supports AGM, Gel, Calcium, LiON, LiFePO4, VRLA, and Lead Acid batteries✔ MPPT Solar Input – Efficient charging from solar panels (16-25V, minimum 60W panel required)✔ Smart Alternator Compatibility – Works with modern variable voltage alternators✔ Multi-Stage Charging Technology – Protects and optimizes battery performance✔ Battery Chemistry Selection Lockout – Prevents accidental setting changes while in use✔ Automatic Battery Isolation – Prevents main battery discharge when the vehicle is off✔ Pulse Mode Technology – Reduces oxidation and balances electrolyte consistency for longer battery life✔ LED Indicators – Provides real-time battery status and charging condition✔ Built-in Protection Systems:✅ Overcharging & Over-Temperature Protection✅ Short Circuit & Reverse Polarity Protection (Input & Output)✅ Thermal Overload & Solar Input Overload Protection Built to Last in Harsh Environments ✔ Heavy-Duty Aluminum Housing – Durable & weather-resistant for tough conditions✔ Microchip-Controlled Charging – Ensures precise and safe operation✔ Compact & Easy Installation – Mounting bracket included for secure setup Technical Specifications General Specs: Type: Multi-Stage DC to DC Charger Input Voltage (DC Battery): 12.5-16.0V Solar Input Voltage: 16.0-25.0V Output/Charging Voltage: 14.4 - 15.4V (stops charging if alternator or vehicle battery drops below 12.5V) DC Output Current: 20A Solar Output Current: 20A Minimum Start Voltage: 2.5V (for battery being charged) Minimum Solar PV Panel Size: 60W Charge Control & Battery Management: Soft Start: Yes Soft Charge Current: 20A Bulk Charge Voltage: AGM/Gel: 14.7V Lead Acid: 13.5V Calcium: 15.4V LiON: 14.4V Float Charge Voltage: AGM/Gel: 13.5V  Lead Acid: 14.4V Calcium: 13.5V Float Charge Current: 100mA Battery Range: 18-250Ah Recommended Cable Cross-Section: 0-1m: 10AWG 1-5m: 8AWG 5m+: 6AWG Ideal For: ✔ 4WD & Off-Road Vehicles – Powers fridges, lights, and accessories✔ Caravans & RVs – Reliable solar & alternator charging while traveling✔ Boats & Marine Use – Stable power for onboard electronics✔ Camping & Off-Grid Living – Keeps batteries charged for long trips 🛒 Order Your Powerhouse 20A DC to DC Dual Battery Charger Today! ✅ Fast Shipping | ✅ Secure Checkout | ✅ Trusted Off-Grid Power Solution 🔋 Stay powered up with the Powerhouse 20A – the perfect balance of efficiency, durability, and smart charging technology!

Read more less

Powertran 12V DC 2A Power Supply Adapter – M8936D High-Quality 12V Plug Pack for Electronic Devices & Appliances (2.1mm DC Jack) Reliable Power for Your 12V Devices The Powertran 12V DC 2A Appliance Power Supply Adapter (M8936D) is a compact, high-efficiency plug pack designed to power a wide range of 12V electronics and appliances. With a regulated 2A output, positive-tip 2.1mm DC jack, and MEPS-approved design, it provides clean, stable power for devices requiring dependable performance. Built to strict Australian standards and compatible with all AU mains outlets, this adapter is perfect for powering LED lighting, routers, CCTV cameras, small appliances, and general electronics. Key Features 12V DC Regulated Output (2A) – stable, reliable power delivery Fixed 2.1mm DC Plug (2.1 ID × 5.5 OD × 10mm length) Energy Efficient: MEPS Efficiency Level V Australian Standards Approved: Complies with local safety and performance requirements Compact & Lightweight Design – easy to install and unobtrusive Wide Compatibility: Suitable for a broad range of 12V devices Long Cable: 1.2m DC output cable Ideal For LED strips and lighting systems Routers, modems & network devices CCTV cameras and security equipment Small household electronics 12V hobby projects and DIY electronics Audio equipment, portable gear & test devices Technical Specifications Model: M8936D Input Voltage: 100–240V AC Output Voltage: 12V DC Output Current: 2A Polarity: Centre positive DC Jack Size: 5.5mm OD × 2.1mm ID × 10mm length Cable Length: 1.2m Efficiency: MEPS Level V Dimensions: 44(W) × 80(H) × 40(D) mm Why Choose the Powertran M8936D? Dependable, efficient, and built to Australian safety standards, the Powertran 12V 2A Power Supply is the perfect replacement or upgrade for powering everyday electronics and hobby equipment. With its regulated output and compact design, it's a reliable choice for both home and professional use.

Read more less

Leverages advanced Maximum Power Point Tracking (MPPT) for optimal efficiency and charging capacity. Accommodates 8-32V lead-acid (sealed, gel, or flooded) or lithium battery banks, and supports 12V solar arrays up to 260W or 24V DC arrays up to 520W. Boasts quick, efficient, and secure charging via bulk, constant, and float charge stages, with vital current, voltage, and charge status feedback illuminated on the LCD. Durable construction and heavy-duty screw terminals permit cabling of up to 10AWG for permanent installation.   Note: For Lithium 12.8v batteries, MP3741 has pre-programmed Charge Mode F04 and for 25.6v lithium batteries, Charge Mode F08 is available! Can't find the right Charge Mode for your battery? Not a problem - just get MP3746 and program the controller with data from your battery specs sheet. Features: Advanced MPPT control technology High tracking and conversion efficiency Supports Sealed, Gel, or flooded lead acid and Lithium batteries 3-stage intelligent charging Multiple load work modes Extensive electronic protection Backlit LCD display RS485 communication Common negative grounding Specifications: Compatible Battery Bank Voltages 12 / 24VDC Selectable  Maximum Input Power 520W (24VDC System) / 260W (12VDC System)  Input Voltage 16 - 100VDC  Max Load Current 20A  Dimensions 221(H) x 155(W) x 52(D)mm, 940g Battery support: Sealed, gel or flooded Lead-acid (8~17V/12V; 18~32V/24V) LiFePO4 (12V/24V) LiNiCoMnO2 (12V/24V) Specifications Packaged Volume : 3.35l Packaged Weight : 1.1kg Packaged Length : 24.7cm Packaged Width : 17.6cm Packaged Height : 7.7cm Width : 155mm Height : 221mm Depth : 52mm Weight : 940g DC Voltage : 12V, 24V Max Solar Panel Array : 520W Max PV Open Circuit Voltage : 100V Max Charging Current : 22.5A Max Load Current : 20A Charge Controller Technology : Maximum Power Point Tracking (MPPT)

Read more less

Kemo M148A Low Battery Cut Off Module – 12V Battery Discharge Protector Automatic Voltage Protection for 4WD, Caravan, Marine & Off-Grid Systems Prevent Battery Damage & Extend Battery Life The Kemo M148A Low Battery Cut-Off Module is a smart and reliable device designed to protect your 12V battery from deep discharge. It automatically disconnects connected appliances—such as fridges, TVs, and accessories—before the battery voltage drops too low, helping to preserve battery health and avoid costly replacements. Ideal for dual battery setups, this module is perfect for use in 4WDs, caravans, boats, RVs, and solar or wind energy systems, giving you peace of mind while running essential equipment. Key Features Automatic Low Voltage Cut-OffDisconnects loads when battery voltage drops below a set threshold Adjustable Cut-Off VoltageSet between 10.4V – 13.3V DC to suit your system requirements Automatic Reset FunctionReconnects power once voltage rises (approx. +0.8V above cut-off) High Switching CapacitySupports up to 20A maximum switching current Low Power Consumption <0.7mA when OFF <1.6mA when ON Compact & Easy InstallationSimple wiring and a small footprint for flexible mounting Ideal Applications 4WD dual battery systems Caravan and camper setups Marine and boat electrical systems RV and motorhome power systems Solar and wind energy installations Portable fridge and accessory protection Technical Specifications Model: M148A Operating Voltage: 12V DC Max Switching Current: 20A Cut-Off Voltage Range: 10.4V – 13.3V DC Reset Voltage: Approx. +0.8V (±0.3V) above cut-off Current Consumption: OFF: <0.7mA ON: <1.6mA Physical Dimensions Length: 87mm Width: 60mm Height: 32mm Packaging Packaged Weight: 0.2kg Packaged Dimensions: 13.4 × 8.6 × 4.4 cm Packaged Volume: 0.51L Why Choose the Kemo M148A? The Kemo M148A is an affordable yet highly effective solution for protecting your battery investment. By preventing deep discharge, it helps extend battery life, improves system reliability, and ensures you always have enough power when you need it most.

Read more less

Powerhouse 2.1mm DC Jack to Anderson Style Cable – 0.3m DC Barrel to Anderson 50A Power Adapter Cable for 12V Appliances & Solar Generators Convert Anderson Power to 2.1mm DC Devices The Powerhouse 2.1mm DC Jack to Anderson Style Cable provides a simple and reliable way to power DC appliances from an Anderson-style power output. Designed with heavy-duty 16AWG twin-core cable, it ensures stable and efficient power delivery for portable power systems. This adapter is also ideal for use with portable power generators featuring 2.1mm solar inputs, such as the Powerhouse M8199B, making it a versatile accessory for off-grid power setups. Compact and durable, the 0.3m cable length keeps connections neat while maintaining flexibility in tight installations. Key Features Anderson to DC Barrel Adapter – Power DC devices from Anderson outputs Heavy Duty 16AWG Cable – Reliable power delivery and durability Short 0.3m Cable Length – Ideal for compact setups 15A Maximum Current Capacity Compatible with Portable Power Generators – Including models with 2.1mm solar input Perfect for Off-Grid and 12V Power Systems Ideal Applications Portable power generators Solar battery systems 12V appliances Camping and caravan setups 4WD auxiliary power systems Off-grid power installations Technical Specifications Cable Length: 300mm Cable Type: 16AWG twin core Input Type: Anderson 50A 2 Pole Input Connection: Plug Output Type: 2.1mm DC barrel Output Connection: Plug Output Quantity: 1 Maximum Current: 15A  Specifications are subject to change without notice. Warranty 12 Month Manufacturer's warranty from the date of purchase.  Why Choose the Powerhouse Anderson to DC Cable? This adapter cable provides a quick, safe, and reliable connection between Anderson power outputs and devices requiring a 2.1mm DC input. It’s an essential accessory for portable solar power systems, camping setups, and backup power solutions.

Read more less

Powerhouse 12V 9Ah Sealed Lead Acid (SLA) Gel Battery – F1 4.8mm Reliable Backup Battery for NBN Boxes, UPS Systems & Alarm Equipment High-Capacity 12V Backup Power You Can Depend On The Powerhouse 12V 9Ah Sealed Lead Acid (SLA) Gel Battery is one of the most widely used SLA battery sizes for backup power applications. Designed for NBN connection boxes, UPS systems, alarm panels, communications equipment, and emergency lighting, it provides reliable standby power and consistent performance. Featuring 4.8mm F1 spade terminals, the battery can be quickly replaced in most compatible devices. Its fully sealed gel construction ensures safe, maintenance-free operation with no risk of electrolyte leakage. Key Features 12V 9Ah Capacity – Ideal for high-demand standby and backup applications Sealed Lead Acid (SLA) Gel Design – Maintenance-free and non-spillable 4.8mm F1 Spade Terminals – Easy installation and replacement UPS Grade Cells – Designed for dependable standby performance ActivFire Listed (afp3824) – Suitable for compliant fire and safety systems IEC Certified – Conforms to IEC 60896-21 and IEC 60896-22 standards Fully Sealed Construction – Prevents electrolyte leakage UN 2800 Rated – Non-spillable battery (Hazard Class 8) Ideal Applications NBN backup battery replacement UPS (Uninterruptible Power Supply) systems Alarm and security systems Communications equipment Emergency lighting systems Fire panels and monitoring systems Technical Specifications General Nominal Voltage: 12V Capacity: 9Ah (20-hour rate @ 10.5V) Terminal Type: F1 / 4.8mm spade Dimensions: 151L × 65W × 100H mm (including terminals) Weight: 2.6kg Designed Float Life: 5 years Capacity Ratings 20 Hour Rate: 9Ah 10 Hour Rate: 8.4Ah 1 Hour Rate: 5.9Ah Capacity vs Temperature 40°C: 102% 25°C: 100% 0°C: 85% -15°C: 65% Charging Characteristics Internal Resistance: ~20mΩ Float Charging Voltage: 13.6 – 13.8V @ 25°C Cyclic Charging Voltage: 14.5 – 15V @ 25°C Maximum Charging Current: 2.7A Maximum Discharge Current: 135A (5 seconds)  Important Notes Temperatures above 65°C may affect the ABS housing. Ensure the battery is well ventilated in warm environments. Not suitable for installation in engine bays. Warranty 12 Month Manufacturer's warranty from the date of purchase. Why Choose Powerhouse SLA Batteries? Powerhouse SLA batteries are sourced from quality manufacturers and graded for UPS and standby applications. Compared to lower-cost alternatives, they offer longer service life, consistent performance, and dependable backup power.

Read more less

Powerhouse 12V DC Power Control Hub with Power Meter Display High-Capacity 12/24V Power Distribution Hub for Caravans, 4WDs & Off-Grid Systems Centralised Power Control for All Your 12/24V Needs The Powerhouse 12V DC Power Control Hub is a complete, pre-wired power distribution solution for your auxiliary battery. Designed for caravans, 4WDs, camper trailers, boats, and motorhomes, it allows you to power up to 13 devices simultaneously through a wide range of connection types—including USB, DC jacks, car accessory sockets, and high-capacity Anderson-style plugs. With a backlit meter display showing voltage, temperature, wattage, and connection status, this hub gives you full control and visibility over your portable power system. It is fully compatible with AGM, LiFePO₄, Wet, Gel, and Calcium deep-cycle batteries, making it a versatile and reliable part of any off-grid or touring setup. Key Features Complete 12/24V Power Distribution Hub – pre-wired and ready to install Supports up to 13 devices at once Backlit Power Meter Display showing: Input Voltage (VDC) Temperature Input Wattage Connection indicators Multiple Output Options: 2 × USB-A (2.4A) 2 × USB-A QC3.0 fast-charge (up to 18W) 1 × USB-C Power Delivery (20W) 1 × USB-C Power Delivery (100W, PD 3.0) 2 × Car accessory sockets (12V/20A or 24V/10A) 2 × DC jack outputs (5.5 × 2.1mm, 12V/10A) Four 50A Anderson Style Ports 1 × input 3 × output Auto-reset 50A circuit protection Top-Mounted LED Torch Light Durable Housing: Made from UL94V-0 fire-rated ABS plastic Surface Mounting Brackets Included  Ideal For Caravans, camper trailers & motorhomes 4WD touring and dual-battery setups Marine & boating power systems Camping power distribution Off-grid cabins & portable workstations  Technical Overview Materials: ABS plastic Dimensions: 170 × 120 × 64 mm Weight: 600g Battery Types Supported: LiFePO₄, AGM, Calcium, Wet, Gel USB-A Ports: 5V/2.4A USB-A QC3.0 Ports: 5V/3A, 9V/2A, 12V/1.5A (18W) USB-C PD (100W): 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/5A USB-C PD (20W): 5V/3A, 9V/2.22A, 12V/1.67A Car Accessory Sockets: 12V/20A or 24V/10A DC Jack Outputs: 12V/10A (5.5 × 2.1mm) Anderson Style Ports: 50A total (with auto-reset circuit breaker) Operating Temperature: –5°C to +55°C  Why Choose the Powerhouse DC Power Hub? If you want maximum convenience, flexibility, and safety when managing your 12/24V power system, this hub is the ultimate solution. With high-speed USB charging, multiple accessory outputs, and Anderson connectivity, it gives you professional-grade power distribution in a compact, rugged design—perfect for off-grid living and serious touring.

Read more less

Powerhouse 12V Lithium MPPT Solar Charge Controller – 20A Compact IP67 Weatherproof Solar Regulator for LiFePO₄ Battery Systems Efficient, Reliable Lithium Battery Charging The Powerhouse 12V Lithium MPPT Solar Charge Controller (20A) is a compact, IP67-rated weatherproof module engineered for LiFePO₄ lithium batteries. Using advanced Maximum Power Point Tracking (MPPT) technology, it delivers up to 20% more charge efficiency compared to standard PWM regulators, giving you more power from your solar panels or reducing the total panel wattage needed for new systems. Perfect for vehicle power systems, ticketing stations, marine applications, and remote installations, this controller ensures safe, stable, and efficient charging even in demanding outdoor environments. Key Features Advanced MPPT Charging: Extracts maximum efficiency from solar panels, up to 20% more charge energy than PWM systems Lithium-Specific Design: Optimised for LiFePO₄ batteries only Fully Sealed IP67 Housing: Dustproof, waterproof, and weatherproof for harsh outdoor environments Comprehensive Protection: Built-in safeguards against over-temperature, short circuit, overvoltage, and undervoltage Automatic System Management: 12V operation with smart low-voltage disconnect Compact & Efficient: Ideal for permanent installations or mobile setups with limited space Ideal For Vehicle and 4WD electrical systems Caravans, campers, and RVs Marine power systems and boats Remote ticketing and lighting systems Solar-powered pumps and small off-grid setups Technical Specifications Model: Powerhouse MPPT-Li 20A System Voltage: 12V Battery Compatibility: LiFePO₄ only Rated Charge/Load Current: 20A Output Power: 300W No Load Current: <20mA Maximum Solar Input Voltage: <50V Low Voltage Disconnect: 12V Battery Under-Voltage Protection: 11.2V Protection Features: Over-temperature shutdown Short circuit protection Under-input voltage shutdown Battery undervoltage cutoff Protection Rating: IP67 (fully sealed weatherproof design) Why Choose the Powerhouse 12V Lithium MPPT 20A Controller? Engineered for modern lithium battery systems, the Powerhouse MPPT 20A Solar Charge Controller combines robust protection, compact weatherproof design, and maximum charging performance. It’s the perfect solution for off-grid, mobile, and remote power applications where reliability and efficiency matter most.

Read more less