Batteries

15W 12V Monocrystalline Solar Battery Charger Panel – 0.84A Output Compact Solar Maintainer for Cars, Caravans, 4WDs, Boats & Remote Installations Keep Your 12V Battery Charged Year-Round This 15W Monocrystalline Solar Panel is designed to maintain and top up 12V automotive batteries, making it ideal for vehicles and equipment that sit idle for extended periods. With a 0.84A rated output, it helps prevent battery drain in cars, caravans, 4WDs, boats, and motorcycles. Supplied with crocodile clips and a car accessory plug adapter, it connects directly to your battery in seconds. For permanent setups, it includes mounting hardware for roof installation on caravans, boats, and off-grid systems. ⚠️ Note: Despite a misprint in older instructions, this model is suitable for permanent outdoor installation, including rain exposure. Key Features 15W Monocrystalline Solar Panel – Efficient and reliable trickle charging 0.84A Output Current – Ideal for maintaining 12V automotive batteries All-Season Operation – Performs year-round in outdoor conditions Tempered Glass & Aluminium Frame – Durable, weather-resistant construction Bypass Diode Protection – Prevents battery discharge at night Multiple Connection Options: Crocodile clip connection Car accessory plug connection 2.5m Lead Included – Flexible installation positioning Permanent Mounting Hardware Included Suitable for Remote Power Installations Ideal Applications Car & motorcycle battery maintenance Caravan & camper trailer battery systems 4WD auxiliary batteries Boats & marine applications Electric fences Water pumping stations Remote lighting systems Off-grid trickle charging  Technical Specifications Power: 15W Rated Voltage: 18.0V Rated Current: 0.84A Open Circuit Voltage: 21.5V Short Circuit Current: 0.91A Maximum System Voltage: 1000V Test Conditions: AM1.5, 1000W/m², 25°C Dimensions: 440L × 343W × 17D mm Weight: 1.67kg Cable Length: 2.5m Important Usage Note This solar charger is ideal for continuous battery maintenance. Always disconnect the panel before starting the vehicle. Why Choose This 15W Solar Maintainer? Compact, reliable, and easy to install, this 15W monocrystalline solar panel provides a simple and effective way to keep 12V batteries charged without mains power. Whether mounted permanently or used as a portable solution, it delivers dependable off-grid performance.

Read more less

Powerhouse 5W 12V Solar Battery Charger Panel, 0.28A Compact Monocrystalline Solar Maintainer for Cars, Caravans, 4WDs & Boats Keep Your 12V Batteries Charged Anywhere The Powerhouse 5W 12V Solar Battery Charger is a compact monocrystalline solar panel designed to maintain and top up 12V automotive batteries. With a steady 0.28A output, it helps prevent battery drain in vehicles and equipment that sit unused for extended periods. Perfect for cars, motorcycles, caravans, boats, and 4WDs, this panel can connect directly to your battery using the included crocodile clips or car accessory plug adapter. It also includes mounting hardware for permanent installation on caravan or boat roofs, making it ideal for both portable and fixed setups. Key Features 5W Monocrystalline Solar Panel, Efficient trickle charging for 12V batteries 0.28A Output Current, Ideal for maintaining automotive and leisure batteries Multiple Connection Options Crocodile clips for direct battery connection Car accessory plug adapter Bypass Diode Protection, Prevents battery discharge during low-light conditions Durable Outdoor Construction, Tempered glass panel with aluminium frame 2.5m Cable Included, Flexible placement and easy installation Suitable for Permanent Installation, Includes mounting hardware Ideal Applications Car and motorcycle battery maintenance Caravan and camper trailer batteries 4WD auxiliary battery systems Boat and marine battery maintenance Electric fences Remote lighting installations Water pumping stations Off-grid solar trickle charging Technical Specifications Power Output: 5W Rated Voltage: 18.0V Rated Current: 0.28A Open Circuit Voltage: 21.5V Short Circuit Current: 0.31A Maximum System Voltage: 1000V Test Conditions: AM1.5, 1000W/m², 25°C Dimensions: 350L × 125W × 18.5D mm Weight: 0.55kg Cable Length: 2.5m Important Notes Suitable for permanent outdoor installation (the instruction sheet incorrectly states otherwise). This solar charger can remain permanently connected to the battery. Always disconnect the panel before starting the vehicle. About the Powerhouse 5W Solar Charger Compact, reliable, and easy to install, this 5W solar battery maintainer provides a simple way to keep 12V batteries charged when mains power isn’t available. It’s an ideal solution for vehicles, caravans, boats, and remote installations.

Read more less

Powerhouse 12V Lithium MPPT Solar Charge Controller, 20A Compact IP67 Weatherproof Solar Regulator for LiFePO₄ Battery Systems Efficient, Reliable Lithium Battery Charging The Powerhouse 12V Lithium MPPT Solar Charge Controller (20A) is a compact, IP67-rated weatherproof module for LiFePO₄ lithium batteries. Using Maximum Power Point Tracking (MPPT), it delivers up to 20% more charge efficiency than standard PWM regulators, so you get more power from your solar panels or need less total panel wattage in a new system. Perfect for vehicle power systems, ticketing stations, marine applications, and remote installations, this controller ensures safe, stable, and efficient charging even in demanding outdoor environments. Key Features Advanced MPPT Charging: Extracts maximum efficiency from solar panels, up to 20% more charge energy than PWM systems Lithium-Specific Design: Optimised for LiFePO₄ batteries only Fully Sealed IP67 Housing: Dustproof, waterproof, and weatherproof for harsh outdoor environments Comprehensive Protection: Built-in safeguards against over-temperature, short circuit, overvoltage, and undervoltage Automatic System Management: 12V operation with smart low-voltage disconnect Compact & Efficient: Ideal for permanent installations or mobile setups with limited space Ideal For Vehicle and 4WD electrical systems Caravans, campers, and RVs Marine power systems and boats Remote ticketing and lighting systems Solar-powered pumps and small off-grid setups Technical Specifications Model: Powerhouse MPPT-Li 20A System Voltage: 12V Battery Compatibility: LiFePO₄ only Rated Charge/Load Current: 20A Output Power: 300W No Load Current: <20mA Maximum Solar Input Voltage: <50V Low Voltage Disconnect: 12V Battery Under-Voltage Protection: 11.2V Protection Features: Over-temperature shutdown Short circuit protection Under-input voltage shutdown Battery undervoltage cutoff Protection Rating: IP67 (fully sealed weatherproof design) About the Powerhouse 12V Lithium MPPT 20A Controller Made for lithium battery systems, the Powerhouse MPPT 20A Solar Charge Controller combines battery protection, a compact weatherproof design and efficient charging. It suits off-grid, mobile and remote power applications where reliability and efficiency matter.

Read more less

Powerhouse 20A DC to DC Dual Battery Charger with MPPT Solar Input Efficient Dual Battery Charging for 4WD, Camping & Off-Grid Power The Powerhouse 20A DC to DC Battery Charger is an in-vehicle charger for 4WDs, caravans, marine setups and off-grid applications. It keeps your auxiliary battery charged from both the vehicle’s alternator and solar panels. The MPPT (Maximum Power Point Tracking) solar input improves charging efficiency in varying sunlight. Built with a rugged aluminium housing and electronic protection, the Powerhouse 20A charger provides fully automatic multi-stage charging, which prevents overcharging and extends battery life. The battery isolation system keeps your main battery protected. Key Features & Benefits ✔ 20A DC to DC Charging, Supports AGM, Gel, Calcium, LiON, LiFePO4, VRLA, and Lead Acid batteries✔ MPPT Solar Input, Efficient charging from solar panels (16-25V, minimum 60W panel required)✔ Smart Alternator Compatibility, Works with modern variable voltage alternators✔ Multi-Stage Charging Technology, Protects and optimizes battery performance✔ Battery Chemistry Selection Lockout, Prevents accidental setting changes while in use✔ Automatic Battery Isolation, Prevents main battery discharge when the vehicle is off✔ Pulse Mode Technology, Reduces oxidation and balances electrolyte consistency for longer battery life✔ LED Indicators, Provides real-time battery status and charging condition✔ Built-in Protection Systems:✅ Overcharging & Over-Temperature Protection✅ Short Circuit & Reverse Polarity Protection (Input & Output)✅ Thermal Overload & Solar Input Overload Protection Built to Last in Harsh Environments ✔ Heavy-Duty Aluminum Housing, Durable & weather-resistant for tough conditions✔ Microchip-Controlled Charging, Ensures precise and safe operation✔ Compact & Easy Installation, Mounting bracket included for secure setup Technical Specifications General Specs: Type: Multi-Stage DC to DC Charger Input Voltage (DC Battery): 12.5-16.0V Solar Input Voltage: 16.0-25.0V Output/Charging Voltage: 14.4 - 15.4V (stops charging if alternator or vehicle battery drops below 12.5V) DC Output Current: 20A Solar Output Current: 20A Minimum Start Voltage: 2.5V (for battery being charged) Minimum Solar PV Panel Size: 60W Charge Control & Battery Management: Soft Start: Yes Soft Charge Current: 20A Bulk Charge Voltage: AGM/Gel: 14.7V Lead Acid: 13.5V Calcium: 15.4V LiON: 14.4V Float Charge Voltage: AGM/Gel: 13.5V Lead Acid: 14.4V Calcium: 13.5V Float Charge Current: 100mA Battery Range: 18-250Ah Recommended Cable Cross-Section: 0-1m: 10AWG 1-5m: 8AWG 5m+: 6AWG Ideal For: ✔ 4WD & Off-Road Vehicles, Powers fridges, lights, and accessories✔ Caravans & RVs, Reliable solar & alternator charging while traveling✔ Boats & Marine Use, Stable power for onboard electronics✔ Camping & Off-Grid Living, Keeps batteries charged for long trips ✅ Fast Shipping | ✅ Secure Checkout | ✅ Trusted Off-Grid Power Solution

Read more less

12V 8Ah LiFePO4 Battery - SLA Replacement Looking for a lightweight and long-lasting battery? Our 12V 8Ah LiFePO4 replacement battery is compatible with traditional 7Ah and 9Ah SLA batteries but delivers all the benefits of advanced lithium technology. This LiFePO4 battery offers a longer service life, weighs less than half of SLA batteries, and provides longer run times with a consistent higher voltage until capacity is almost exhausted. Key Benefits of LiFePO4 Batteries Longer Service Life: Enjoy up to 10x the lifespan compared to lead-acid batteries. Lighter Weight: Less than half the weight of SLA batteries, making it perfect for portable and off-grid applications. Better Performance: More usable life per cycle, giving you longer run times with consistent power output. Low Self-Discharge: Maintains 80-90% charge when in storage, significantly higher than lead-acid batteries. Safe and Efficient Power Each LiFePO4 battery is equipped with an internal battery management system (BMS) to ensure safe charging and discharging. The BMS offers protection against: Short circuits Overheating Under/over-voltage This battery can be wired in series or parallel configurations. For optimal performance, charge each battery individually to 100% using the same charger before connecting them. Important Note: When using this battery in recreational vehicles (e.g., caravans, campers, 4WDs), follow the Australian Standard AS/NZS 3001:2. Professional installation is recommended. Features 5-Year Warranty for peace of mind. Drop-in Replacement for standard lead-acid 7Ah or 9Ah batteries. Half the Weight of traditional SLA batteries. Low Self-Discharge: Retains charge better than lead-acid. Extended Service Life and longer run times. Factory Supplied at 30% Charge for safety compliance. Can be used in series and parallel configurations. Specifications Dimensions: 151mm (L) x 65mm (W) x 99mm (H) Weight: 0.8kg Terminal Type: F1 Voltage Range: 12.8V - 51.2V (Max 4 in series, no limit in parallel) Case Material: ABS, IP65 rating for water and dust protection Certification: CB/CE Shipping Class: UN3480, Class 9 Electrical Specifications Nominal Voltage: 12.8V Capacity: 8Ah Charging Voltage: 14.8V Max (Recommended 13.8V) Discharging Voltage: 8.8V Max (Recommended 10.6V) Charging Current: 10A Max (Recommended 3A) Max Constant Discharge: 10A Caution: Excessive temperatures above 65ºC may affect the ABS housing. Ensure proper ventilation in warm conditions. Not suitable for use in engine bays.

Read more less

Powertran 12V DC 2A Power Supply Adapter – M8936D High-Quality 12V Plug Pack for Electronic Devices & Appliances (2.1mm DC Jack) Reliable Power for Your 12V Devices The Powertran 12V DC 2A Appliance Power Supply Adapter (M8936D) is a compact, high-efficiency plug pack designed to power a wide range of 12V electronics and appliances. With a regulated 2A output, positive-tip 2.1mm DC jack, and MEPS-approved design, it provides clean, stable power for devices requiring dependable performance. Built to strict Australian standards and compatible with all AU mains outlets, this adapter is perfect for powering LED lighting, routers, CCTV cameras, small appliances, and general electronics. Key Features 12V DC Regulated Output (2A) – stable, reliable power delivery Fixed 2.1mm DC Plug (2.1 ID × 5.5 OD × 10mm length) Energy Efficient: MEPS Efficiency Level V Australian Standards Approved: Complies with local safety and performance requirements Compact & Lightweight Design – easy to install and unobtrusive Wide Compatibility: Suitable for a broad range of 12V devices Long Cable: 1.2m DC output cable Ideal For LED strips and lighting systems Routers, modems & network devices CCTV cameras and security equipment Small household electronics 12V hobby projects and DIY electronics Audio equipment, portable gear & test devices Technical Specifications Model: M8936D Input Voltage: 100–240V AC Output Voltage: 12V DC Output Current: 2A Polarity: Centre positive DC Jack Size: 5.5mm OD × 2.1mm ID × 10mm length Cable Length: 1.2m Efficiency: MEPS Level V Dimensions: 44(W) × 80(H) × 40(D) mm Why Choose the Powertran M8936D? Dependable, efficient, and built to Australian safety standards, the Powertran 12V 2A Power Supply is the perfect replacement or upgrade for powering everyday electronics and hobby equipment. With its regulated output and compact design, it's a reliable choice for both home and professional use.

Read more less

Powerhouse 12V 9Ah Sealed Lead Acid (SLA) Gel Battery, F2 6.3mm High-Capacity Backup Battery for UPS, Alarms, Communications & Emergency Systems Reliable 12V Backup Power for Critical Systems The Powerhouse 12V 9Ah Sealed Lead Acid (SLA) Gel Battery is one of the most widely used backup batteries for UPS systems, alarm panels, communications equipment, and emergency lighting systems. It is designed for standby use. Featuring 6.3mm F2 spade terminals, the battery can be easily replaced in compatible equipment, making maintenance quick and simple. Its fully sealed gel construction ensures safe, maintenance-free operation with no risk of electrolyte leakage. Key Features 12V 9Ah Capacity, Ideal for high-demand standby and backup applications Sealed Lead Acid (SLA) Gel Design, Maintenance-free and non-spillable F2 6.3mm Spade Terminals, Easy installation and replacement UPS Grade Cells, Designed for reliable standby performance ActivFire Listed (afp3824), Suitable for compliant fire and safety systems IEC Certified, Conforms to IEC 60896-21 and IEC 60896-22 standards Fully Sealed Construction, Prevents electrolyte leakage UN 2800 Rated, Non-spillable battery (Hazard Class 8) Ideal Applications UPS (Uninterruptible Power Supply) systems Alarm and security systems Communications equipment Emergency lighting systems Fire panels and monitoring systems Backup power systems Technical Specifications General Nominal Voltage: 12V Capacity: 9Ah (20-hour rate @ 10.5V) Terminal Type: F2 / 6.3mm spade Dimensions: 151L × 65W × 100H mm (including terminals) Weight: 2.65kg Container Material: ABS Battery Life: 3 to 5 years (standby use) Electrical Cells Per Unit: 6 Internal Resistance: ~18mΩ Max Discharge Current: 135A (5 seconds) Charging Characteristics Max Charge Current: 2.52A Charge Voltage: 14.4 to 15V Float Voltage: 13.5 to 13.8V Temperature Range Charging: 0°C to 40°C Discharging: -15°C to 50°C Storage: -15°C to 40°C Important Notes Temperatures above 65°C may affect the ABS housing. Ensure the battery is well ventilated in warm environments. Not suitable for installation in engine bays. Warranty 12 Month Manufacturer's warranty from the date of purchase. About Powerhouse SLA Batteries Powerhouse SLA batteries are sourced from reliable manufacturers and graded for UPS and standby applications. Compared to lower-cost alternatives, they offer consistent performance, longer lifespan, and dependable backup power.

Read more less

Portable Power Station – 155Wh Lithium-Ion Battery for Camping & Emergency Use 🔋⚡ Stay powered anywhere with this compact and efficient portable power station. Whether you're camping, traveling, or experiencing a power outage, this slim yet powerful unit delivers 155Wh of battery capacity – equivalent to a 42Ah USB power bank – to keep your essential devices charged. Equipped with multiple output options, including a 100W AC inverter, 12V ports, and high-speed USB charging, this power station ensures reliable performance on the go. Key Features & Benefits: ✅ High-Capacity Lithium-Ion Battery – 11.1V 14Ah (155Wh) battery provides long-lasting power for a variety of devices.✅ 100W AC Inverter (150W Peak) – Power small tools, shavers, laptop chargers, and other compact appliances.✅ Multiple Output Options – 3 x 12V ports (150W peak), USB ports, and QuickCharge 3.0 for versatile charging solutions.✅ Fast USB Charging – 2 x 2.1A USB Type-A, 1 x Qualcomm™ QuickCharge® 3.0 (3.5A max shared).✅ MPPT Solar Charging – Efficient solar panel charging (solar panel sold separately) with a built-in MPPT controller for faster and optimized charging.✅ LCD Power Indicator – Real-time battery status monitoring.✅ Built-in LED Torch & Light Panel – Perfect for outdoor use and emergency lighting.✅ Safety Features – Short-circuit, overload, and over-temperature protection to keep your devices safe.✅ Multiple Recharge Options – Charge via solar panel (not included), mains power, or car charger for flexible recharging. Technical Specifications: ✔ Battery Type: 11.1V 14Ah Lithium-Ion (155Wh)✔ AC Output: 100W (Modified Sinewave, 150W peak)✔ 12V DC Output: 3 x 12V ports (150W peak)✔ USB Output: 2 x USB-A (5V, 2.1A each, 3.5A max shared) 1 x Qualcomm QuickCharge 3.0 USB-A (5~9V, 2A) 1 x USB-C (5~9V, 2A Qualcomm QuickCharge 3.0)✔ Charging Options: Solar, Mains, or 12V car charger✔ Solar Charging: MPPT controller for efficient charging (solar panel sold separately)✔ Safety Features: Overload, short-circuit, and over-temperature protection Dimensions & Weight: ✔ Length: 207mm✔ Width: 96mm✔ Height: 180mm✔ Weight: 2kg✔ Packaged Dimensions: 28.8cm (H) x 14.2cm (W) x 26.2cm (L)✔ Packaged Weight: 2.44kg What’s in the Box? ✔ 1 x Portable Power Station (155Wh)✔ 1 x Mains Adapter✔ 1 x Car Charger✔ 1 x User Manual Get Reliable Power Anytime, Anywhere! Perfect for camping, road trips, power outages, and outdoor adventures, this portable power station keeps your devices running when you need them the most. With its multiple charging options, high-capacity battery, and built-in safety features, it’s an essential companion for off-grid power. 🚀 Order now and stay powered on the go!

Read more less

Leverages advanced Maximum Power Point Tracking (MPPT) for optimal efficiency and charging capacity. Accommodates 8-32V lead-acid (sealed, gel, or flooded) or lithium battery banks, and supports 12V solar arrays up to 260W or 24V DC arrays up to 520W. Boasts quick, efficient, and secure charging via bulk, constant, and float charge stages, with vital current, voltage, and charge status feedback illuminated on the LCD. Durable construction and heavy-duty screw terminals permit cabling of up to 10AWG for permanent installation.   Note: For Lithium 12.8v batteries, MP3741 has pre-programmed Charge Mode F04 and for 25.6v lithium batteries, Charge Mode F08 is available! Can't find the right Charge Mode for your battery? Not a problem - just get MP3746 and program the controller with data from your battery specs sheet. Features: Advanced MPPT control technology High tracking and conversion efficiency Supports Sealed, Gel, or flooded lead acid and Lithium batteries 3-stage intelligent charging Multiple load work modes Extensive electronic protection Backlit LCD display RS485 communication Common negative grounding Specifications: Compatible Battery Bank Voltages 12 / 24VDC Selectable  Maximum Input Power 520W (24VDC System) / 260W (12VDC System)  Input Voltage 16 - 100VDC  Max Load Current 20A  Dimensions 221(H) x 155(W) x 52(D)mm, 940g Battery support: Sealed, gel or flooded Lead-acid (8~17V/12V; 18~32V/24V) LiFePO4 (12V/24V) LiNiCoMnO2 (12V/24V) Specifications Packaged Volume : 3.35l Packaged Weight : 1.1kg Packaged Length : 24.7cm Packaged Width : 17.6cm Packaged Height : 7.7cm Width : 155mm Height : 221mm Depth : 52mm Weight : 940g DC Voltage : 12V, 24V Max Solar Panel Array : 520W Max PV Open Circuit Voltage : 100V Max Charging Current : 22.5A Max Load Current : 20A Charge Controller Technology : Maximum Power Point Tracking (MPPT)

Read more less

Powertech MP3760 – 12/24V 10A Dual Battery PWM Solar Charge Controller The Powertech MP3760 is a reliable and efficient dual battery PWM solar charge controller, designed to manage and optimise power delivery in both 12V and 24V solar systems. With advanced PWM technology and support for dual battery charging, this controller helps maintain battery health and system safety in off-grid, mobile, or RV solar setups. Perfect for large solar arrays and demanding environments, this charge controller features LED status indicators, built-in electronic protections, and a low overnight self-consumption rate to maximise energy efficiency.     Key Features: Dual battery charging – charge 2 separate battery banks simultaneously Supports both 12V and 24V systems Highly efficient PWM charging technology Electronic protection against overcharging, short circuits, and reverse polarity LED indicators for easy monitoring of charge and battery status Low standby current draw – only 4mA overnight Recommended panel: ZM9065 14.1A (controller output is panel-limited) Max solar input voltage: 30V (12V) / 55V (24V) Battery voltage range: 8–15V (12V) / 8–30V (24V)         Ideal For: Solar power systems with dual battery banks Off-grid cabins and battery backup installations RVs, campervans, and marine systems Remote monitoring setups and mobile solar power systems         Product Specifications: Technology: PWM (Pulse Width Modulation) Voltage Support: 12V / 24V systems Max Current Draw: 10A Dimensions: 153 mm (W) x 76 mm (H) x 37 mm (D) Packaged Weight: 0.23 kg Packaged Volume: 0.71 L Self-Consumption: 4mA (overnight)

Read more less

Lightweight 12.8V 6Ah LiFePO4 replacement battery with integrated BMS, IP65 housing, 20A continuous discharge, and 5-year warranty The Powerhouse 12V 6Ah LiFePO4 Lithium Battery is a replacement for similarly sized sealed lead-acid (SLA) batteries, with lower weight, longer service life, and greater usable capacity per charge cycle. Weighing just 0.7kg, this LiFePO4 battery is less than half the weight of many comparable SLA batteries. Its lithium iron phosphate chemistry maintains a higher operating voltage throughout the discharge cycle, providing longer usable runtime while also offering excellent charge retention during storage. An integrated Battery Management System (BMS) provides protection against short circuits, excessive temperature, over-voltage, and under-voltage conditions. The battery can also be configured in series or parallel for applications requiring increased voltage or capacity. Key Features 12.8V 6Ah LiFePO4 TechnologyModern lithium iron phosphate chemistry for dependable power and extended service life Integrated Battery Management System (BMS)Provides internal protection during charging and discharging Lightweight 0.7kg DesignLess than half the weight of many equivalent lead-acid batteries 20A Maximum Continuous DischargeSuitable for applications requiring substantial current from a compact battery Excellent Storage PerformanceRetains approximately 80 to 90% charge during storage Longer Usable RuntimeMaintains a higher voltage deeper into the discharge cycle compared with traditional SLA batteries Series & Parallel CompatibleUp to four batteries can be connected in series, with parallel configurations also supported IP65-Rated ABS HousingDurable enclosure for demanding applications Maintenance-Free OperationNo routine electrolyte maintenance required 5-Year WarrantyLong-term warranty coverage for added peace of mind Applications Ideal for: SLA battery replacement Portable electronics Backup power systems Alarm and security equipment Communications equipment Camping and portable power Electronics projects Low-voltage power systems Specifications General Brand: Powerhouse Battery Chemistry: LiFePO4 Lithium Iron Phosphate Nominal Voltage: 12.8V Capacity: 6Ah Terminal Type: F1 / 4.8mm Dimensions: 90mm (L) × 70mm (W) × 107mm (H) Weight: 0.7kg Case Material: ABS Case Rating: IP65 Certification: CB / CE Shipping Classification: UN3480, Class 9 Charging Maximum Charging Voltage: 14.2V Recommended Charging Voltage: 13.8V Maximum Charging Current: 6A Recommended Charging Current: 1.2A Discharging Discharge Voltage: 11.2V Maximum Continuous Discharge: 20A Battery Configuration Maximum Series Configuration: 4 batteries / 51.2V Parallel Configuration: No specified limit Battery Management System Protection The integrated BMS provides protection against: Short circuits Over-temperature conditions Over-voltage Under-voltage Unsafe charging and discharging conditions Important Usage Information The battery is factory supplied at approximately 30% charge for transportation and safety compliance and must be fully charged before first use. When connecting multiple batteries, it is recommended that each battery be individually charged to 100% using the same charger before connection to ensure balanced terminal voltages. Important: Temperatures above 65°C can affect the ABS enclosure. Ensure adequate ventilation in warm environments. This battery is not suitable for installation inside engine bays. About the Powerhouse 12V 6Ah LiFePO4 Battery Compared with traditional SLA batteries, the Powerhouse LiFePO4 offers lower weight, longer service life, improved storage performance, greater usable capacity, and integrated BMS protection. It is an upgrade for compatible 12V applications. Warranty 5-Year Warranty This Powerhouse LiFePO4 battery is backed by a 5-year warranty.

Read more less

Powerhouse 12V 1.3Ah Sealed Lead Acid (SLA) Battery, F1 4.8mm Compact Backup Battery for Alarm Systems, UPS & Communications Equipment Reliable Compact 12V Backup Power The Powerhouse 12V 1.3Ah Sealed Lead Acid Battery is a compact power source for alarm systems, UPS units, communications equipment, and other 12V backup applications. Its sealed lead acid (SLA) construction gives maintenance-free operation, a non-spillable design, and consistent standby performance. Fitted with 4.8mm F1 spade terminals, this battery can be easily replaced in compatible equipment, making it ideal for maintaining reliable backup power in security and monitoring systems. Key Features 12V 1.3Ah Capacity, Ideal for standby and backup power systems Sealed Lead Acid (SLA) Design, Maintenance-free and non-spillable F1 4.8mm Spade Terminals, Quick and easy replacement in compatible equipment UPS Grade Cells, Selected for dependable standby performance ActivFire Listed (afp3824), Suitable for fire and safety systems IEC Certified, Conforms to IEC 60896-21 and IEC 60896-22 standards Fully Sealed Construction, Prevents electrolyte leakage UN 2800 Rated, Non-spillable battery (Hazard Class 8) Ideal Applications Alarm and security systems UPS (Uninterruptible Power Supply) units Communications equipment Emergency lighting systems Fire panels and monitoring systems Backup power devices Technical Specifications General Nominal Voltage: 12V Capacity: 1.3Ah (20-hour rate @ 5.25V) Terminal Type: F1 / 4.8mm spade Dimensions: 97L × 43W × 58H mm (including terminals) Weight: 0.55kg Designed Float Life: 5 years Capacity Ratings 20 Hour Rate: 1.3Ah 10 Hour Rate: 1.1Ah 1 Hour Rate: 0.78Ah Capacity vs Temperature 40°C: 102% 25°C: 100% 0°C: 85% -15°C: 65% Charging Characteristics Internal Resistance: ~95mΩ Float Charging Voltage: 13.6 to 13.8V @ 25°C Cyclic Charging Voltage: 14.5 to 15V @ 25°C Maximum Charging Current: 0.36A Maximum Discharge Current: 18A (5 seconds) Important Notes Excessive temperatures above 65°C may affect the ABS housing. Ensure the battery is well ventilated in warm environments. Not suitable for installation in engine bays. Warranty 12 Month Manufacturer's warranty from the date of purchase. About Powerhouse SLA Batteries Powerhouse SLA batteries are sourced from quality manufacturers and graded for UPS and standby applications. Compared to lower-quality alternatives, they deliver consistent performance, reliable backup power, and longer service life.

Read more less

Powerhouse 12V DC Power Control Hub with Power Meter Display High-Capacity 12/24V Power Distribution Hub for Caravans, 4WDs & Off-Grid Systems Centralised Power Control for All Your 12/24V Needs The Powerhouse 12V DC Power Control Hub is a complete, pre-wired power distribution unit for your auxiliary battery. Designed for caravans, 4WDs, camper trailers, boats, and motorhomes, it lets you power up to 13 devices simultaneously through a range of connection types, including USB, DC jacks, car accessory sockets, and high-capacity Anderson-style plugs. With a backlit meter display showing voltage, temperature, wattage, and connection status, this hub gives you full control and visibility over your portable power system. It is fully compatible with AGM, LiFePO₄, Wet, Gel, and Calcium deep-cycle batteries, making it a versatile and reliable part of any off-grid or touring setup. Key Features Complete 12/24V Power Distribution Hub, pre-wired and ready to install Supports up to 13 devices at once Backlit Power Meter Display showing: Input Voltage (VDC) Temperature Input Wattage Connection indicators Multiple Output Options: 2 × USB-A (2.4A) 2 × USB-A QC3.0 fast-charge (up to 18W) 1 × USB-C Power Delivery (20W) 1 × USB-C Power Delivery (100W, PD 3.0) 2 × Car accessory sockets (12V/20A or 24V/10A) 2 × DC jack outputs (5.5 × 2.1mm, 12V/10A) Four 50A Anderson Style Ports 1 × input 3 × output Auto-reset 50A circuit protection Top-Mounted LED Torch Light Durable Housing: Made from UL94V-0 fire-rated ABS plastic Surface Mounting Brackets Included  Ideal For Caravans, camper trailers & motorhomes 4WD touring and dual-battery setups Marine & boating power systems Camping power distribution Off-grid cabins & portable workstations  Technical Overview Materials: ABS plastic Dimensions: 170 × 120 × 64 mm Weight: 600g Battery Types Supported: LiFePO₄, AGM, Calcium, Wet, Gel USB-A Ports: 5V/2.4A USB-A QC3.0 Ports: 5V/3A, 9V/2A, 12V/1.5A (18W) USB-C PD (100W): 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/5A USB-C PD (20W): 5V/3A, 9V/2.22A, 12V/1.67A Car Accessory Sockets: 12V/20A or 24V/10A DC Jack Outputs: 12V/10A (5.5 × 2.1mm) Anderson Style Ports: 50A total (with auto-reset circuit breaker) Operating Temperature:, 5°C to +55°C About the Powerhouse DC Power Hub This hub is built for convenience, flexibility, and safety when managing your 12/24V power system. It has high-speed USB charging, multiple accessory outputs, and Anderson connectivity in a compact, rugged design for off-grid living and touring.

Read more less

Powertran 3-12V DC 600mA/1A Appliance Power Supply Adapter (M9449C) 🔌⚡ The Powertran M9449C is a multi-voltage regulated appliance plug pack designed for versatile power delivery across a range of electronic devices. With adjustable voltage outputs and seven interchangeable DC plug tips, it ensures compatibility with various appliances. Key Features: ✅ Multi-Voltage Output, Adjustable from 3V to 12V DC for flexible use.✅ Variable Current Output, Delivers up to 1A at lower voltages, reducing to 600mA at 12V.✅ Multiple Plug Tips Included, Comes with six interchangeable DC connectors for universal compatibility.✅ Australian Standards Compliant, Designed for safe and reliable operation with Australian mains power.✅ Compact and Durable, Small form factor with sturdy construction, perfect for home, office, or workshop use. Included Plug Tips: ✔ 2.1 x 5.5mm✔ 2.5 x 5.5mm✔ 1.35 x 5.5mm✔ 1.7 x 4.0mm✔ 1.5 x 5.0mm✔ 0.75 x 2.35mm Voltage & Current Output: 🔹 3V / 4.5V / 5V / 6V DC @ 1A🔹 7.5V DC @ 0.9A🔹 9V DC @ 0.8A🔹 12V DC @ 0.6A Specifications: 🔹 Wattage: 3.0W (min), 7.2W (max)🔹 Input: 100-240V AC, 50/60Hz, 155mA🔹 Cord Length: Approx 1.8m🔹 Dimensions: 39W x 68H x 40D mm Ideal For: 🔌 Electronics & Appliances, Suitable for replacing lost or broken power adapters.🔌 DIY & Hobby Projects, Great for makers, tinkerers, and engineers.🔌 Home & Office Use, Powers modems, routers, LED lights, cameras, and more. Get a Reliable & Versatile Power Supply Today! The Powertran M9449C Adapter is a universal power supply with adjustable voltage, multiple plug tips and high efficiency. It suits various electronic devices. 👉 Order yours now!

Read more less

Powerhouse 40A DC to DC Dual Battery Charger with MPPT Solar Input Reliable In-Vehicle Battery Charging Solution The Powerhouse 40A DC to DC Battery Charger is designed for 4WDs, caravans, RVs, boats, and off-grid setups with dual batteries. It automatically regulates power from both your vehicle’s alternator and solar panels to keep your auxiliary battery charged and protected. With multi-stage charging, this unit supports Lead Acid, AGM/Gel, Calcium, LiON, and LiFePO4 battery types. The built-in MPPT solar charge controller optimizes solar charging efficiency, accepting PV solar panels within 16-25V (minimum 100W panel required). 🔹 Battery Chemistry Lockout Feature, Prevents changes while the auxiliary battery is connected, ensuring safe and reliable charging. Key Features 🔋 40A DC to DC Charging, Supports AGM, Gel, Calcium, LiON, LiFePO4, VRLA, and Lead Acid batteries☀ MPPT Solar Input, Maximum Power Point Tracking for optimal solar efficiency🚗 Smart Alternator Compatibility, Works with modern variable voltage alternators⚡ Multi-Stage Charging, Automatic 4-stage charging with battery isolation💡 LED Indicators, Displays real-time charging status and battery condition🔌 Battery Chemistry Selection Lockout, Prevents accidental changes when connected Advanced Protection Features ✅ Overcharging & Over-temperature Protection✅ Short Circuit & Reverse Polarity Protection (Input & Output)✅ Thermal Overload Protection✅ Solar Input Overload Protection Durable & User-Friendly Design 💪 Heavy-Duty Aluminium Case & Mounting Bracket, Built for rugged environments🔧 Microchip Monitoring & Control, Ensures precise charging and safety🔄 Pulse Mode Technology, Reduces oxidation, balances electrolyte consistency, and extends battery life🚀 Power Cut Memory Function, Charger retains the last battery setting after power loss Perfect For: ✔ 4WD & Off-Road Vehicles, Powers fridges, lights, and accessories✔ Caravans & RVs, Ensures continuous power while travelling✔ Boats & Marine Use, Provides stable power for onboard electronics✔ Camping & Off-Grid Living, Efficiently charges auxiliary batteries via solar Specifications General Type: Multi-Stage DC Battery Input: 12.5-16.0V Solar Input: 16.0-25.0V Output/Charging Voltage: 14.4 - 15.4V (Stops charging when alternator output or vehicle battery drops below 12.5V) DC Output Current: 40A Solar Output Current: 40A Minimum Start Voltage: 2.5V (for battery being charged) Minimum Solar PV Panel Size: 100W Charge Control Soft Start: Yes Soft Charge Current: 40A Bulk Charge Voltage: 14.7V (AGM/Gel) 13.5V (Lead Acid) 15.4V (Calcium) 14.4V (LiON) Absorption: Constant voltage with automatic amperage control Float Charge Voltage: 13.5V (AGM/Gel) 14.4V (Lead Acid) 13.5V (Calcium) Float Charge Current: 100mA Battery Range: 60-500Ah Recommended Cable Cross-Section 0-1 meters: 8AWG 1-5 meters: 6AWG 5+ meters: 4AWG

Read more less

12/24V MPPT Solar Charge Controller Kit, Maximize Solar Energy Efficiency Smart Solar Power Management for Off-Grid & Hybrid Systems The 12/24V MPPT Solar Charge Controller Kit is a high-efficiency system designed to optimize solar panel performance by using Maximum Power Point Tracking (MPPT) technology. This advanced controller maximizes energy output, ensuring faster and more efficient battery charging for 12V or 24V systems. Suits off-grid, hybrid and remote power systems. The controller manages energy flow between your solar panels and batteries and provides power regulation for RVs, boats, homes and solar backup systems. Key Features MPPT Technology for Maximum Energy Harvesting Tracks and adjusts solar input in real time for optimal energy conversion. Improves charging efficiency by up to 30% compared to traditional PWM controllers. Automatic 12V/24V Voltage Detection Intelligently adapts to 12V or 24V battery systems. Eliminates manual configuration, ensuring plug-and-play compatibility. Comprehensive Protection Features Overload protection to prevent system damage. Short circuit protection ensures system stability. Reverse polarity protection safeguards batteries and panels. User-Friendly LCD Display & Monitoring Real-time system performance tracking with an intuitive LCD screen. Displays voltage, charging status, and battery health for easy monitoring. Versatile & Compatible with Multiple Solar Setups Works with various solar panel configurations. Ideal for off-grid cabins, RVs, boats, homes, and backup power systems. Why Choose the 12/24V MPPT Solar Charge Controller? ✔ Higher Efficiency, MPPT technology ensures the best power conversion from solar panels.✔ Versatile & Adaptive, Auto-detects 12V/24V battery systems for hassle-free operation.✔ Reliable Protection, Advanced safety features extend battery life and prevent damage.✔ User-Friendly Interface, LCD display provides real-time monitoring and system status updates.✔ Built for Multiple Applications, Perfect for off-grid, hybrid, and backup solar power setups. Power Your Solar System with Maximum Efficiency Whether you're looking to improve solar panel efficiency, power an off-grid setup, or reliably charge batteries for your RV, boat, or home, the 12/24V MPPT Solar Charge Controller Kit ensures optimal energy conversion and long-term system protection. Order now and maximize your solar power potential!

Read more less

This Powertech Desktop Power Supply provides a reliable 12V DC 5A current. It comes with 5 plugs to ensure the right connection for your device. Enjoy hassle-free operation thanks to its reliable performance and long-lasting durability. It is equipped with built-in over-voltage, over-current, and short-circuit protection, so you can depend on its stable power output. Plus, its lightweight and sleek design ensures easy portability. Each requires a separate IEC 240VAC lead - Cat No. PS-4106. Includes 5 output plugs. Specifications DC current rating : 5A DC Voltage : 12V Length : 115mm Width : 51mm Height : 32mm Rated for AU Mains : Yes Packaged Volume : 1.18l Packaged Weight : 0.33kg Packaged Length : 13.7cm Packaged Width : 20.1cm Packaged Height : 4.3cm Type of Power Supply : Desktop Number of Output Plugs : 5pc Voltage Display : No Current Display : No

Read more less

Powertech Mini Power Hub, Reliable 12V & 24V Power Distribution High-Performance Multi-Port Power Hub for Versatile Applications The Powertech HB8522 is a highly efficient mini power hub designed to handle both 12V and 24V power sources with ease. Built for outdoor and mobile power setups, it delivers up to 30A of continuous power with minimal resistance, ensuring stable and reliable energy distribution for all your essential devices. Housed in a rugged aluminium casing with an IP65 weather-resistant rating, this power hub is built to withstand harsh environments, making it ideal for 4WDs, caravans, marine, camping, and off-grid power setups. Whether you're charging devices or running appliances, the HB8522 offers multiple power outputs, including high-current battery connectors, USB ports, and cigarette lighter sockets for maximum versatility. Key Features & Benefits ✔ High Current Power Distribution, Supports 12V and 24V power sources✔ 50A High-Current Battery Connector, Reliable input and output connections✔ Multiple USB Charging Ports: 4 x USB-A (2.4A each), Fast charging for smartphones, tablets, and accessories 1 x USB Type-C (60W Power Delivery), Ideal for laptops, tablets, and fast-charging devices✔ Dual 12V Cigarette Lighter Sockets, Power appliances like fridges, air compressors, and more✔ Built-in Battery Isolator Switch, Protects your vehicle’s main battery from discharge✔ Integrated LED Voltmeter, Easily monitor battery status and power levels✔ Internal Fuse Block, Provides overcurrent protection for connected devices✔ Compact & Durable Aluminum Construction, Weather-resistant IP65 rating for outdoor use✔ Pre-Drilled Mounting Holes, For easy and secure installation in vehicles or off-grid setups Technical Specifications Physical Dimensions & Weight: Width: 160mm Height: 160mm Depth: 80mm Weight: 0.8kg Power Output Options: USB-C PD Output: 5-20V DC @ 60W (Fast Charging) USB-A Output: 4 x 5V DC @ 2.4A Cigarette Lighter Sockets: 2 x 12V High-Current Battery Connectors: 2 x 50A Power Input & Voltage: Supports 12V & 24V power sources Maximum Output Current: 30A Packaging Details: Packaged Volume: 2.78L Packaged Weight: 0.88kg Packaged Dimensions: 16.9cm (L) x 16.6cm (W) x 9.9cm (H) Perfect For: ✔ 4WD & Overlanding Enthusiasts, Power fridges, lights, and navigation systems✔ Caravans & RV Travellers, Keep your devices and appliances charged on the go✔ Marine & Boating Applications, Reliable power for essential marine electronics✔ Camping & Off-Grid Living, Efficient charging solution for remote locations✔ Worksites & Mobile Workshops, Power tools, communication devices, and accessories Order Your Powertech HB8522 Mini Power Hub Today! ✅ Fast Shipping | ✅ Secure Checkout | ✅ Trusted Power Solution

Read more less

Powertech's SB2200 6.4V 4.5Ah Lithium Deep Cycle Battery is ideal for powering your electronics. This ultra-compact battery boasts a powerful charge capacity of 4.5Ah, providing efficient energy for a long shelf life. Enjoy a reliable, high-performance source of power for all your electronics needs. This battery features a unique design that is certified safe and is designed to deliver power and safety combined. Get the performance you need and peace of mind that comes with knowing that your device is powered for the long-term. Features: Much lighter than Lead Acid and AGM Batteries Robust LiFePO4 Cells Excellent life span Specifications: Service Life: 10yrs+ Cycle Life: 1500+ cycles (> 80% capacity retention) Cut-Off Voltage: 5.0V approx. Charge Type: Constant Current / Constant Voltage Discharge Current: 4.5A Max Continuous Current: ≤9A (≤5 sec) Internal Cells: 18650 LiFePO4 Maximum Internal Resistance: 55mO Operating Temperature: 0-45°C (60°C max discharging) Operating Humidity: RH < 85% Storage Temperature: 0-40°C (15-25°C recommended) Storage Humidity: RH < 50% DG Ship Name : 3480 - Lithium Ion Batteries Width : 70mm Height : 101mm Depth : 47mm Weight : 360g Recharging Voltage : 7.2V Standard Recharge Current : 4A Battery Chemical Composition : Lithium Iron - Li-Fe Amp Hour Rating : 4.5Ah Connection Type : Spade Terminals DC Voltage : 6.4V DG UN Number : 3480 Battery Watt Hour Rating (Required for Lithium Batteries) : 28.8Wh Packaged Length : 7.7cm Packaged Weight : 0.4kg Packaged Width : 11.7cm Packaged Height : 5.5cm Packaged Volume : 0.5l DG Class : 9 DG Pack Group : II - Medium Danger DG Hazardous Chemical Code : 4W Battery usage : Bulk Storage Peak Discharge Duration : 5sec Type of battery : li-ion Continuous Current : 4.5A Internal Resistance : 70mΩ Battery Peak Current : 5Alithi

Read more less

The Powertech MP3764 solar charge controller is designed to provide efficient energy efficiency with its 30A capacity and PWM charging technology. The LCD display keeps you in control, providing an at-a-glance view of battery levels. Backed by 12/24V output, this controller delivers reliable performance. This powerful system ensures you can fully power your day-to-day tasks with confidence as it continuously regulates charge to maximize your solar controller efficiency. Battery Support: Sealed, Gel or flooded Lead (8V - 30V) LiFePO4 (4S/12V, 8S/24V) Features: 8 - 32VDC Operating Range, 50VDC Maximum Open-Circuit Solar Voltage Compatible with Lead acid and LiFePO4 batteries Flush mount Bulk, Boost/Equalize, Float charging modes LCD screen with real-time energy stats, operational and fault message Battery temperature compensation Remote control; monitor and set parameters via PC or APP 10mm2/8AWG Recommended Cable Size (16mm2/6AWG Max) Max input: 360W @ 12V, 720W @ 24V  Wi-Fi Connection Module (Sold Separately) Add Wi-Fi communication to the MP3764 Solar Charge Controller with this interface and control your power installation with your Smartphone - up to 50m communication range Specifications : DC current rating : 30A DC Voltage : 12V, 24V IP Rating : IP30 Dust/Particle Ingress Protection : 3 - Objects > 2.5mm, Tools, thick wires etc Liquid/Moisture Ingress Protection : 0 - Not protected Width : 179mm Height : 106mm Depth : 49mm Weight : 300g Packaged Volume : 1.66l Packaged Weight : 0.45kg Packaged Length : 20.9cm Packaged Width : 12.6cm Packaged Height : 6.3cm Dimensions details : Mounting Screw Hole Size Diameter : 5mm Dimension details : Mounting Cutout Width : 96mm Height : 158mm Charge Controller Technology : Pulse Width Modulated (PWM) Max PV Open Circuit Voltage : 30V Max Charging Current : 30A

Read more less