Batteries
Powerhouse Powerhouse 5W 12V Solar Battery Charger N0700A
Powerhouse 5W 12V Solar Battery Charger Panel – 0.28A Compact Monocrystalline Solar Maintainer for Cars, Caravans, 4WDs & Boats Keep Your 12V Batteries Charged Anywhere The Powerhouse 5W 12V Solar Battery Charger is a compact monocrystalline solar panel designed to maintain and top up 12V automotive batteries. With a steady 0.28A output, it helps prevent battery drain in vehicles and equipment that sit unused for extended periods. Perfect for cars, motorcycles, caravans, boats, and 4WDs, this panel can connect directly to your battery using the included crocodile clips or car accessory plug adapter. It also includes mounting hardware for permanent installation on caravan or boat roofs, making it ideal for both portable and fixed setups. Key Features 5W Monocrystalline Solar Panel – Efficient trickle charging for 12V batteries 0.28A Output Current – Ideal for maintaining automotive and leisure batteries Multiple Connection Options Crocodile clips for direct battery connection Car accessory plug adapter Bypass Diode Protection – Prevents battery discharge during low-light conditions Durable Outdoor Construction – Tempered glass panel with aluminium frame 2.5m Cable Included – Flexible placement and easy installation Suitable for Permanent Installation – Includes mounting hardware Ideal Applications Car and motorcycle battery maintenance Caravan and camper trailer batteries 4WD auxiliary battery systems Boat and marine battery maintenance Electric fences Remote lighting installations Water pumping stations Off-grid solar trickle charging Technical Specifications Power Output: 5W Rated Voltage: 18.0V Rated Current: 0.28A Open Circuit Voltage: 21.5V Short Circuit Current: 0.31A Maximum System Voltage: 1000V Test Conditions: AM1.5, 1000W/m², 25°C Dimensions: 350L × 125W × 18.5D mm Weight: 0.55kg Cable Length: 2.5m Important Notes Suitable for permanent outdoor installation (the instruction sheet incorrectly states otherwise). This solar charger can remain permanently connected to the battery. Always disconnect the panel before starting the vehicle. Why Choose the Powerhouse 5W Solar Charger? Compact, reliable, and easy to install, this 5W solar battery maintainer provides a simple way to keep 12V batteries charged when mains power isn’t available. It’s an ideal solution for vehicles, caravans, boats, and remote installations.
$44.00 $39.95
POWERTECH POWERTECH 12/24VDC 7.5A 10-Step Bluetooth® Intelligent Lead Acid and Lithium Battery Charger MB3908
12V/24V LiFePO4 & Lead Acid Smart Battery Charger with Bluetooth® Monitoring This intelligent battery charger is designed to charge, maintain, and optimize both 12V and 24V LiFePO4 and Lead Acid batteries. With 10-step charging technology, an LCD display, and Bluetooth® connectivity, it ensures peak battery performance while providing remote monitoring via your smartphone. It also doubles as a 13.6V 5A DC power supply, making it a versatile tool for multiple applications. Key Features: ✅ Supports 12V & 24V Batteries – Compatible with LiFePO4 and Lead Acid (AGM, Gel, Wet, Calcium) batteries.✅ 10-Step Smart Charging – Maintains battery health and maximizes longevity.✅ Bluetooth® Connectivity – Monitor charging status remotely via your smartphone app (Password: 123456 for pairing).✅ LCD Screen with Push-Button Controls – Select charging modes and view progress at a glance.✅ Integrated 13.6V 5A DC Power Supply Mode – Provides stable DC power output for powering devices.✅ IP65 Waterproof & Dustproof Rating – Suitable for workshops, garages, and outdoor use.✅ Battery Clip & Eye Terminal Leads Included – Flexible connection options for different applications.✅ Mains Powered – Reliable charging from any AC power source. Specifications: 🔌 Charging Voltage: 🔹 Lead Acid (Normal): 14.5V / 29V DC🔹 Cold/AGM Mode: 14.7V / 29.4V DC🔹 LiFePO4 Mode: 12.8V (4 cells) ⚡ Charging Current: 🔹 Lead Acid: 12V 7.5A, 24V 3.75A🔹 LiFePO4: 5A ⚙️ Power Supply Mode: 🔹 Output: 13.6V 5A 🌧️ Protection & Durability: 🔹 Ingress Protection Rating: IP65 (Water & Dust Resistant) 📦 Dimensions & Weight: 🔹 Packaged Volume: 4.82L🔹 Packaged Weight: 1.32kg🔹 Packaged Size: 35.1cm (L) × 17.6cm (W) × 7.8cm (H)🔹 Charger Dimensions: 252mm (L) × 109mm (W) × 62mm (H)🔹 Weight: 960g 🔄 Battery Compatibility: 🔹 Sealed Lead Acid (SLA), AGM, Gel, Wet, Calcium, and LiFePO4🔹 Charger Output Voltage: 12.8V / 29.4V🔹 Charger Output Current: 5A🔹 Number of Charging Modes: 10 Ideal For: ✅ Cars, Boats, Motorcycles, RVs & Off-Grid Batteries✅ Solar Storage Battery Maintenance✅ Garage & Workshop Battery Charging✅ Long-Term Battery Storage & Preservation✅ Emergency DC Power Supply Applications Why Choose This Smart Battery Charger? 🔹 Advanced 10-Step Charging for Peak Battery Performance🔹 Universal Compatibility with 12V & 24V Batteries🔹 Bluetooth® Monitoring for Ultimate Convenience🔹 Durable IP65 Rating for Outdoor & Indoor Use🔹 DC Power Supply Mode for Additional Utility Upgrade your battery maintenance with this smart charger! Keep your batteries fully charged, healthy, and ready to go. 🔋📲
$159.00 $147.00
Powerhouse Powerhouse 15W 12V Solar Battery Charger N0706A
15W 12V Monocrystalline Solar Battery Charger Panel – 0.84A Output Compact Solar Maintainer for Cars, Caravans, 4WDs, Boats & Remote Installations Keep Your 12V Battery Charged Year-Round This 15W Monocrystalline Solar Panel is designed to maintain and top up 12V automotive batteries, making it ideal for vehicles and equipment that sit idle for extended periods. With a 0.84A rated output, it helps prevent battery drain in cars, caravans, 4WDs, boats, and motorcycles. Supplied with crocodile clips and a car accessory plug adapter, it connects directly to your battery in seconds. For permanent setups, it includes mounting hardware for roof installation on caravans, boats, and off-grid systems. ⚠️ Note: Despite a misprint in older instructions, this model is suitable for permanent outdoor installation, including rain exposure. Key Features 15W Monocrystalline Solar Panel – Efficient and reliable trickle charging 0.84A Output Current – Ideal for maintaining 12V automotive batteries All-Season Operation – Performs year-round in outdoor conditions Tempered Glass & Aluminium Frame – Durable, weather-resistant construction Bypass Diode Protection – Prevents battery discharge at night Multiple Connection Options: Crocodile clip connection Car accessory plug connection 2.5m Lead Included – Flexible installation positioning Permanent Mounting Hardware Included Suitable for Remote Power Installations Ideal Applications Car & motorcycle battery maintenance Caravan & camper trailer battery systems 4WD auxiliary batteries Boats & marine applications Electric fences Water pumping stations Remote lighting systems Off-grid trickle charging Technical Specifications Power: 15W Rated Voltage: 18.0V Rated Current: 0.84A Open Circuit Voltage: 21.5V Short Circuit Current: 0.91A Maximum System Voltage: 1000V Test Conditions: AM1.5, 1000W/m², 25°C Dimensions: 440L × 343W × 17D mm Weight: 1.67kg Cable Length: 2.5m Important Usage Note This solar charger is ideal for continuous battery maintenance. Always disconnect the panel before starting the vehicle. Why Choose This 15W Solar Maintainer? Compact, reliable, and easy to install, this 15W monocrystalline solar panel provides a simple and effective way to keep 12V batteries charged without mains power. Whether mounted permanently or used as a portable solution, it delivers dependable off-grid performance.
$79.95 $79.50
Digitech DC1075 Spare Li-ion Battery to suit DC-1074 / DC-1093
This DC1075 Spare Li-ion Battery is specifically designed as a replacement for the DC1074 and DC1093 Digitech radios. With a 3W power output and waterproof design, this battery ensures reliable performance for your marine or land communication needs. Stay connected with confidence.
$39.95
Powertech Powertran 3-12V DC 600mA Appliance Power Supply Adapter M9449B
Powertran 3-12V DC 600mA Appliance Power Supply Adapter (M9449B) 🔌⚡ The Powertran M9449B is a multi-voltage regulated appliance plug pack that provides 3-12V DC at 600mA, making it an ideal power supply for various electronic devices. With seven interchangeable tips, it ensures wide compatibility with different appliances. Key Features: ✅ Adjustable Voltage Output – Supports 3V, 4.5V, 6V, 7.5V, 9V, and 12V DC at 600mA.✅ Multiple DC Plug Tips Included – 7 tip sizes for compatibility with various devices.✅ Compact & Reliable – Ideal for powering small appliances, DIY electronics, and replacement power adapters.✅ Regulated Output – Provides consistent voltage to prevent damage to sensitive electronics. Included Plug Tips: ✔ 2.1 x 5.5mm✔ 2.5 x 5.5mm✔ 1.35 x 5.5mm✔ 1.7 x 4.0mm✔ 1.5 x 5.0mm✔ 0.75 x 2.35mm Voltage & Current Output: 🔹 3V / 4.5V DC @ 600mA🔹 6V / 7.5V DC @ 600mA🔹 9V / 12V DC @ 600mA Perfect For: 🔌 Electronics & Small Appliances – Replaces lost or damaged power adapters.🔌 DIY Projects & Prototyping – Great for hobbyists needing multiple voltage options.🔌 Home & Office Use – Powering routers, modems, LED strips, and more. Get Reliable Power for Your Devices! The Powertran 3-12V DC 600mA Adapter is a must-have for any electronics enthusiast or professional. With adjustable voltage and multiple plug tips, it’s one of the most versatile power supplies available. 👉 Order yours today!
$21.50 $21.00
POWERTECH 6/12VDC 3.8A 8-Step Intelligent Lead Acid and Lithium Battery Charger MB3904
The MB3904 6/12VDC 3.8A 8-Step Intelligent Lead Acid and Lithium Battery Charger is an efficient and easy-to-use battery charger. Its 8-step charging algorithm and 3.8A output ensure optimal battery performance with minimal energy consumption. It is suitable for all lead acid and lithium batteries. FEATURES 6V or 12VDC 8 Step Charging Lead Acid and LiFePO4 SPECIFICATIONS Charging Voltage: Lead Acid (normal): 7.3V/14.4VDC Cold/AGM: 7.4V/14.7VDC LiFePO4: 12.8V/4 cells Charging Current: 0.9A (small), 3.8A (normal) Ingress Rating: IP65 Packaged Volume : 3.23l Packaged Weight : 0.82kg Packaged Length : 31.6cm Packaged Width : 15.5cm Packaged Height : 6.6cm Length : 204mm Width : 74mm Height : 48mm Weight : 534g Type of Batteries : Sealed Lead Acid (SLA)Lithium Ferrous Phosphate (LiFePO4) Charger Output Voltage : 7.3V, 14.4V Charger Output Current : 0.9A, 3.8A Number of Modes : 8 count
$84.95 $79.95
DiaMec DiaMec 12V 7.2Ah SLA Battery SB2486 DM12-7.2
The DiaMec SB2486 DM12-7.2 is a 12V 7.2Ah sealed lead-acid (SLA) battery designed for high performance. It offers a premium combination of rechargeable power, long-lasting reliability, and compact size. Ideal for applications requiring high power and reliable battery backup. It's a reliable source of power with up to 300 cycles of life expectancy and a 3-year shelf life. Perfect for a variety of applications that require a consistent energy supply. Features: Leak proof construction Usable and rechargeable in any position Capable of high discharge rates Deep discharge recovery Wide range of operating temperatures Long service life Specifications Packaged Volume : 1.29l Packaged Weight : 2.18kg Packaged Length : 15.8cm Packaged Width : 7.3cm Packaged Height : 11.2cm Length : 151mm Height : 95mm Depth : 65mm Weight : 2.2kg DC Voltage : 12V Battery usage : Rechargeable Battery Chemical Composition : Sealed Lead Acid (SLA) Battery Peak Current : 108A Amp Hour Rating : 7.2Ah 20 Hour Capacity : 7.2Ah 10 Hour Capacity : 6.48Ah 5 Hour Capacity : 5.76Ah 1 Hour Capacity : 4.32Ah Internal Resistance : 25Ω Connection Type : Spade Terminals Type of battery : SLA Block Recharging Voltage : 14.4V, 15V Standard Recharge Current : 720mA Recharging Time : 12hr
$39.95
Powerhouse Powerhouse 12V 3.5Ah Sealed Lead Acid (SLA) Battery 4.8mm/F1
Powerhouse 12V 3.5Ah Sealed Lead Acid (SLA) Battery – F1 4.8mm Reliable Compact Backup Power for UPS, Alarms & Communications Systems Dependable 12V Backup Power You Can Trust The Powerhouse 12V 3.5Ah SLA Battery is a compact, high-quality sealed lead-acid battery designed for reliable standby and backup power. Commonly used in UPS systems, alarm panels, communications equipment, emergency lighting, and security systems, this battery delivers consistent performance and long service life. Equipped with 4.8mm (F1) spade terminals, it allows easy, user-replaceable installation in most compatible devices. Its fully sealed, non-spillable construction ensures safe operation when installed in properly ventilated environments. Key Features 12V 3.5Ah Capacity – Ideal for backup and standby power applications Sealed Lead Acid (SLA) Design – Maintenance-free and non-spillable F1 4.8mm Terminals – Quick and easy replacement in supported equipment UPS-Grade Cells – Selected for reliability and extended service life ActivFire Listed (afp3824) – Suitable for compliant fire and safety systems IEC Compliant – Conforms to IEC 60896-21 & IEC 60896-22 standards UN 2800 Rated – Non-spillable, Hazard Class 8 ⚠️ Important: Temperatures above 65°C can affect the ABS housing. Ensure good ventilation in warm conditions and do not install in engine bays. Ideal Applications UPS (Uninterruptible Power Supply) systems Alarm and security systems Communications and networking equipment Emergency lighting Fire panels and safety systems General 12V standby power applications Technical Specifications General Nominal Voltage: 12V Capacity: 3.5Ah (20-hour rate @ 10.5V) Cells Per Unit: 6 Battery Life: 3–5 years (standby use) Terminal Type: F1 / 4.8mm spade Container Material: ABS Weight: 1.35kg Dimensions: 134(L) × 67(W) × 66(H) mm (including terminals) Electrical Internal Resistance: ~32 mΩ Max Discharge Current: 54A (5 seconds) Max Charge Current: 1.08A Charge Voltage: 14.4V – 15.0V Float Voltage: 13.5V – 13.8V Temperature Ranges Charging: 0°C to 40°C Discharge: –15°C to 50°C Storage: –15°C to 40°C Why Choose Powerhouse SLA Batteries? Powerhouse SLA batteries are sourced from trusted manufacturers and graded for UPS and critical standby applications. Compared to lower-cost alternatives, they offer better longevity, stable output, and proven reliability, making them ideal for systems where power continuity matters.
$29.50
Powerhouse Powerhouse Battery Maintenance Charger 6V/12V 1.5A AGM/Lithium
Powerhouse 6V/12V 1.5A Battery Maintenance Charger I AGM & Lithium Compatible Smart Multi-Stage Charger for Cars, Bikes, Boats, Caravans & LiFePO₄ Batteries Keep Your Batteries Charged, Protected & Ready to Go The Powerhouse 6V/12V 1.5A Battery Maintenance Charger is a smart, microprocessor controlled charging solution designed for AGM, GEL, EFB, VRLA, SLA, Wet Lead Acid, and LiFePO₄ lithium batteries. Perfect for vehicles and equipment that sit idle for long periods, such as motorbikes, mowers, boats, jet skis, caravans, and auxiliary power systems, this charger ensures your battery stays fully maintained without risk of overcharging. With adaptive multi-stage charging, reverse polarity protection, and spark-proof connections, this unit provides safe, reliable long-term battery care. Key Features Multi-Stage Adaptive ChargingAutomatically adjusts charge levels for AGM, GEL, EFB, Wet, SLA & LiFePO₄ batteries. 6V & 12V OperationSuitable for classic vehicles, small engines, and modern lithium auxiliary systems. Perfect for Maintenance ChargingSafe for permanent connection—ideal for seldom-used vehicles or stored batteries. Lithium ModeOptimised 14.4V DC charging profile for LiFePO₄ remote power batteries. Smart Microcontroller SystemManages safe, efficient charging with automatic float mode. Safety Built-In: Reverse polarity protection Spark-proof connection Fully automatic operation EN 60335-2.29:2017 certified Easy Quick-Connect HarnessIncludes ring terminals and crocodile clips for a flexible setup. Ideal For Non-electric/ICE vehicles Motorbikes, scooters & mopeds Ride-on mowers & agricultural equipment Boats & jet skis Caravans and camper battery systems Auxiliary remote lithium power systems Technical Specifications Input: 100–240V AC, 50/60Hz Output: 6V DC 1.5A (Lead Acid) 12V DC 1.5A (Lead Acid) 14.4V DC 1.4A (LiFePO₄) Limited Voltage: 7.2–7.3V / 14.5–14.7V Max Voltage: 14.7V (Lead Acid), 14.4V (Lithium) Float Current: 300–400mA Charging Mode: Fully automatic Supported Batteries: AGM, EFB, GEL, VRLA, SLA, Wet, LiFePO₄ Permanent Connection: Yes Certifications: EN 60335.2.29:2017 + AI, EMC EN 55014-1:2015 Why Choose the Powerhouse 1.5A Battery Maintainer? This compact yet powerful charger keeps your batteries healthy, safe, and always ready for use, whether you're storing seasonal equipment or preparing for your next camping or boating trip. With universal compatibility and built-in protections, it’s one of the most reliable and user-friendly maintenance chargers available.
$59.00 $55.00
Powerhouse Powerhouse 20A DC To DC Dual Battery Charger With MPPT Solar Input N2087
Powerhouse 20A DC to DC Dual Battery Charger with MPPT Solar Input Efficient Dual Battery Charging for 4WD, Camping & Off-Grid Power The Powerhouse 20A DC to DC Battery Charger is the ideal in-vehicle power solution for 4WDs, caravans, marine setups, and off-grid applications. Designed to keep your auxiliary battery charged from both your vehicle’s alternator and solar panels, this intelligent charger ensures efficient and safe power management. With MPPT (Maximum Power Point Tracking) solar input, it maximizes charging efficiency, even in varying sunlight conditions. Built with rugged aluminum housing and advanced electronic protection, the Powerhouse 20A charger offers fully automatic multi-stage charging, preventing overcharging while extending battery life. The smart battery isolation system ensures that your main battery remains protected, so you never get stranded. Key Features & Benefits ✔ 20A DC to DC Charging – Supports AGM, Gel, Calcium, LiON, LiFePO4, VRLA, and Lead Acid batteries✔ MPPT Solar Input – Efficient charging from solar panels (16-25V, minimum 60W panel required)✔ Smart Alternator Compatibility – Works with modern variable voltage alternators✔ Multi-Stage Charging Technology – Protects and optimizes battery performance✔ Battery Chemistry Selection Lockout – Prevents accidental setting changes while in use✔ Automatic Battery Isolation – Prevents main battery discharge when the vehicle is off✔ Pulse Mode Technology – Reduces oxidation and balances electrolyte consistency for longer battery life✔ LED Indicators – Provides real-time battery status and charging condition✔ Built-in Protection Systems:✅ Overcharging & Over-Temperature Protection✅ Short Circuit & Reverse Polarity Protection (Input & Output)✅ Thermal Overload & Solar Input Overload Protection Built to Last in Harsh Environments ✔ Heavy-Duty Aluminum Housing – Durable & weather-resistant for tough conditions✔ Microchip-Controlled Charging – Ensures precise and safe operation✔ Compact & Easy Installation – Mounting bracket included for secure setup Technical Specifications General Specs: Type: Multi-Stage DC to DC Charger Input Voltage (DC Battery): 12.5-16.0V Solar Input Voltage: 16.0-25.0V Output/Charging Voltage: 14.4 - 15.4V (stops charging if alternator or vehicle battery drops below 12.5V) DC Output Current: 20A Solar Output Current: 20A Minimum Start Voltage: 2.5V (for battery being charged) Minimum Solar PV Panel Size: 60W Charge Control & Battery Management: Soft Start: Yes Soft Charge Current: 20A Bulk Charge Voltage: AGM/Gel: 14.7V Lead Acid: 13.5V Calcium: 15.4V LiON: 14.4V Float Charge Voltage: AGM/Gel: 13.5V Lead Acid: 14.4V Calcium: 13.5V Float Charge Current: 100mA Battery Range: 18-250Ah Recommended Cable Cross-Section: 0-1m: 10AWG 1-5m: 8AWG 5m+: 6AWG Ideal For: ✔ 4WD & Off-Road Vehicles – Powers fridges, lights, and accessories✔ Caravans & RVs – Reliable solar & alternator charging while traveling✔ Boats & Marine Use – Stable power for onboard electronics✔ Camping & Off-Grid Living – Keeps batteries charged for long trips 🛒 Order Your Powerhouse 20A DC to DC Dual Battery Charger Today! ✅ Fast Shipping | ✅ Secure Checkout | ✅ Trusted Off-Grid Power Solution 🔋 Stay powered up with the Powerhouse 20A – the perfect balance of efficiency, durability, and smart charging technology!
$229.00 $199.00
Powerhouse Powerhouse 12V 8Ah Lithium LiFePO4 Battery 4.8mm/F1 - SL4541A
12V 8Ah LiFePO4 Battery - SLA Replacement Looking for a lightweight and long-lasting battery? Our 12V 8Ah LiFePO4 replacement battery is compatible with traditional 7Ah and 9Ah SLA batteries but delivers all the benefits of advanced lithium technology. This LiFePO4 battery offers a longer service life, weighs less than half of SLA batteries, and provides longer run times with a consistent higher voltage until capacity is almost exhausted. Key Benefits of LiFePO4 Batteries Longer Service Life: Enjoy up to 10x the lifespan compared to lead-acid batteries. Lighter Weight: Less than half the weight of SLA batteries, making it perfect for portable and off-grid applications. Better Performance: More usable life per cycle, giving you longer run times with consistent power output. Low Self-Discharge: Maintains 80-90% charge when in storage, significantly higher than lead-acid batteries. Safe and Efficient Power Each LiFePO4 battery is equipped with an internal battery management system (BMS) to ensure safe charging and discharging. The BMS offers protection against: Short circuits Overheating Under/over-voltage This battery can be wired in series or parallel configurations. For optimal performance, charge each battery individually to 100% using the same charger before connecting them. Important Note: When using this battery in recreational vehicles (e.g., caravans, campers, 4WDs), follow the Australian Standard AS/NZS 3001:2. Professional installation is recommended. Features 5-Year Warranty for peace of mind. Drop-in Replacement for standard lead-acid 7Ah or 9Ah batteries. Half the Weight of traditional SLA batteries. Low Self-Discharge: Retains charge better than lead-acid. Extended Service Life and longer run times. Factory Supplied at 30% Charge for safety compliance. Can be used in series and parallel configurations. Specifications Dimensions: 151mm (L) x 65mm (W) x 99mm (H) Weight: 0.8kg Terminal Type: F1 Voltage Range: 12.8V - 51.2V (Max 4 in series, no limit in parallel) Case Material: ABS, IP65 rating for water and dust protection Certification: CB/CE Shipping Class: UN3480, Class 9 Electrical Specifications Nominal Voltage: 12.8V Capacity: 8Ah Charging Voltage: 14.8V Max (Recommended 13.8V) Discharging Voltage: 8.8V Max (Recommended 10.6V) Charging Current: 10A Max (Recommended 3A) Max Constant Discharge: 10A Caution: Excessive temperatures above 65ºC may affect the ABS housing. Ensure proper ventilation in warm conditions. Not suitable for use in engine bays.
$95.00 $92.50
Powertech Powertran 12V DC 2A Appliance Power Supply Adapter M8936D
Powertran 12V DC 2A Power Supply Adapter – M8936D High-Quality 12V Plug Pack for Electronic Devices & Appliances (2.1mm DC Jack) Reliable Power for Your 12V Devices The Powertran 12V DC 2A Appliance Power Supply Adapter (M8936D) is a compact, high-efficiency plug pack designed to power a wide range of 12V electronics and appliances. With a regulated 2A output, positive-tip 2.1mm DC jack, and MEPS-approved design, it provides clean, stable power for devices requiring dependable performance. Built to strict Australian standards and compatible with all AU mains outlets, this adapter is perfect for powering LED lighting, routers, CCTV cameras, small appliances, and general electronics. Key Features 12V DC Regulated Output (2A) – stable, reliable power delivery Fixed 2.1mm DC Plug (2.1 ID × 5.5 OD × 10mm length) Energy Efficient: MEPS Efficiency Level V Australian Standards Approved: Complies with local safety and performance requirements Compact & Lightweight Design – easy to install and unobtrusive Wide Compatibility: Suitable for a broad range of 12V devices Long Cable: 1.2m DC output cable Ideal For LED strips and lighting systems Routers, modems & network devices CCTV cameras and security equipment Small household electronics 12V hobby projects and DIY electronics Audio equipment, portable gear & test devices Technical Specifications Model: M8936D Input Voltage: 100–240V AC Output Voltage: 12V DC Output Current: 2A Polarity: Centre positive DC Jack Size: 5.5mm OD × 2.1mm ID × 10mm length Cable Length: 1.2m Efficiency: MEPS Level V Dimensions: 44(W) × 80(H) × 40(D) mm Why Choose the Powertran M8936D? Dependable, efficient, and built to Australian safety standards, the Powertran 12V 2A Power Supply is the perfect replacement or upgrade for powering everyday electronics and hobby equipment. With its regulated output and compact design, it's a reliable choice for both home and professional use.
$24.75 $23.95
Digitech Digitech 6V,12V Heavy Duty 8A Car Battery Charger,Trickle Charge MB3522
This top of the line charger is designed to safely and effectively charge 6V and 12V car, boat, motorcycle, and lawnmower batteries. It has an intuitive 4-stage LED charge indicator and can be adjusted to trickle or heavy duty charge rate, making it ideal for home charging. It is housed in a durable plastic shell with a handle for easy portability and has overload and reverse polarity protections. The 1-meter cable is terminated with heavy duty alligator clips for a reliable connection. Specifications Packaged Volume : 5.87l Packaged Weight : 2.34kg Packaged Length : 27.4cm Packaged Width : 18.3cm Packaged Height : 11.7cm Cable length : 1m Vehicle Connection : Alligator Clamps Item Connection : Hard Wired Charger Output Voltage : 6V, 12V Connection Type : Alligator Clips Reverse Polarity Protection : true Charger Output Current : 6.8A Cell Type(s) Charged : SLA Block
$109.00 $89.95
Powertech Powertech Dual Input 20A DC/DC Multi-Stage Battery Charger,Lead & Lithium MB3940
This battery charger, the Powertech Dual Input 20A DC/DC Multi-Stage for Lead and Lithium batteries, prioritizes solar power when it's available, so it reduces the load on your engine. With automated ignition detection, your starting battery is isolated from discharge when your engine is off. The microprocessor-controlled circuitry ensures your battery stays in peak condition with six charging modes that include Qualification, Recondition, Bulk, Absorption, Check, and Maintenance. The charger comes with a heavy-duty aluminum case, an included mounting bracket, and an LED-lit front panel that allows you to manage charge status and select between different battery types, such as Lead acid, AGM, Calcium, GEL, or LiFePO4. Additionally, this device features 16-25V open circuit voltage solar panels with various safety protections, such as short circuit, overcharge, over temperature, reverse polarity, thermal overload, and solar input overload. Features: Dual input - solar and/or alternator/car battery 20A max charging current (automatically controlled) Six-stage Battery Charging Supports Lead acid, AGM, Calcium, GEL or LiFePO4 batteries Specifications: Solar Panel Open Circuit Voltage: 16~25V max. Rated Output Power: 13.5~15.4V @ 20A Output (Charge) Voltage: AGM/GEL: 14.3V (Boost), 14.7V (Absorption), 13.5V (Float) Lead acid: 14.0V (Boost), 14.4V (Absorption), 13.5V (Float) Calcium: 15.0V (Boost), 15.4V (Absorption), 13.5V (Float) LiFePO4: 14.0V (Boost), 14.4V (Absorption) Length : 208mm Width : 136mm Height : 38mm Weight : 0.71kg Type of Batteries : Lead AcidLithium Ferrous Phosphate (LiFePO4)AGM Type of converter or transformer : DC to DC Output Type : Bare Leads Packaged Volume : 3.06l Packaged Weight : 1.17kg Packaged Length : 30.8cm Packaged Width : 20.3cm Packaged Height : 4.9cm Operating Temperature : -10°C, 45°C DC current rating : 20A Max PV Open Circuit Voltage : 25V
$249.00 $219.00
POWERTECH Powertech 6/12VDC 4A 8-Step Bluetooth® Intelligent Lead Acid and Lithium Battery Charger MB3906
Powertech MB3906 – 8-Step Lead Acid & Lithium Battery Charger with Bluetooth® Monitoring ⚡ Smart, Safe & Connected Battery Charging The Powertech MB3906 is an advanced 8-step smart battery charger designed for Sealed Lead Acid (SLA) and Lithium Ferrous Phosphate (LiFePO4) batteries. Delivering up to 4A charging current with selectable 6V or 12V output, this charger ensures your batteries receive the correct voltage and current for optimal performance and extended lifespan. Featuring Bluetooth® connectivity, you can remotely monitor charging status and select modes directly from your smartphone. Built-in safety features—including over-voltage protection, reverse polarity detection, and short-circuit prevention—give you peace of mind while charging. Key Features: Multi-Chemistry Support – Compatible with Lead Acid (normal, cold/AGM) and LiFePO4 batteries 8-Step Charging Process – Maximises battery life and performance Selectable Voltage – 6V or 12V DC output Bluetooth® Connectivity – Monitor and control charging modes via smartphone app* 4A Output Current – Fast yet safe charging for a range of battery sizes Built-In Protections – Over-voltage, reverse polarity, and short-circuit protection IP65 Ingress Rating – Dust-tight and water-resistant for rugged use Specifications: Supported Batteries: SLA, LiFePO4 Voltage Output: 6V or 12V DC Charging Voltage: Lead Acid (Normal): 7.3V / 14.5V DC Cold/AGM: 7.4V / 14.7V DC LiFePO4: 12.8V (4 cells) Charging Current: Up to 4.0A Modes: 8 Protection Rating: IP65 Size: 204mm × 74mm × 48mm Weight: 534g (0.82kg packaged) Power Supply: AC mains input Bluetooth® App: For remote monitoring & mode selection* Ideal For: Automotive battery maintenance Marine & boating applications Motorcycles, ATVs, and scooters Home solar battery maintenance Caravans & off-grid power systems Why Choose the Powertech MB3906? Smart multi-stage charging extends battery life Dual chemistry support for versatile use Bluetooth® control for convenience and monitoring Rugged IP65 design for indoor and outdoor environments
$119.00 $113.95
Powertech Powertech Universal Professional Balance Charger/Discharger
The Powertech Universal Professional Balance Charger/Discharger MB3633 is the perfect solution for all your battery charging needs. This charger/discharger features a comprehensive Lithium battery balance charge system and a built-in cooling fan that ensures optimal heat dissipation for a safe and efficient charge. With two LCD displays to monitor the battery's charge status, this charger is reliable and easy to use. The MB3633 also includes an adjustable charging current, with 3 levels of power to accommodate any type of battery you need to charge. This flexible and powerful energy regulating system ensures a smooth, safe, and efficient charge every time. Features: Optional PC control Memory to save 10 charge/discharge profiles Max Charge Power: 50W Max Discharge Power: 5W Charge Current Range: 0.1-6A Discharge Current Range: 0.1-2A Cell Count: LiPo/LiFe/LiIon: 1-6 cells NiCD/NiMH: 1-15 cells Pb (Lead) Battery Voltage: 2-20V Specifications Width : 138mm Height : 36mm Depth : 144mm Weight : 632g Mains Voltage Range : 100V Frequency : 50Hz, 60Hz Rated for AU Mains : true Mains Item connection : Mains AU/NZ 3 Pin Mains lead included : true PSU Powers : Main Product DC Plugpack Voltage : 11V, 18V Packaged Volume : 2.58l Packaged Weight : 1.04kg Packaged Length : 21cm Packaged Width : 20.5cm Packaged Height : 6cm Type of Batteries : Lithium PolymerLithium Ferrous Phosphate (LiFePO4)Lithium IonNickel Metal Hydride (Ni-MH)Nickel Cadmium (Ni-Cad)Lead Acid Number of Cells : 15pc
$169.00 $149.00
Powertech Powertech 20A MPPT Solar Charge Controller, Lithium/SLA Batteries MP3741
Leverages advanced Maximum Power Point Tracking (MPPT) for optimal efficiency and charging capacity. Accommodates 8-32V lead-acid (sealed, gel, or flooded) or lithium battery banks, and supports 12V solar arrays up to 260W or 24V DC arrays up to 520W. Boasts quick, efficient, and secure charging via bulk, constant, and float charge stages, with vital current, voltage, and charge status feedback illuminated on the LCD. Durable construction and heavy-duty screw terminals permit cabling of up to 10AWG for permanent installation. Note: For Lithium 12.8v batteries, MP3741 has pre-programmed Charge Mode F04 and for 25.6v lithium batteries, Charge Mode F08 is available! Can't find the right Charge Mode for your battery? Not a problem - just get MP3746 and program the controller with data from your battery specs sheet. Features: Advanced MPPT control technology High tracking and conversion efficiency Supports Sealed, Gel, or flooded lead acid and Lithium batteries 3-stage intelligent charging Multiple load work modes Extensive electronic protection Backlit LCD display RS485 communication Common negative grounding Specifications: Compatible Battery Bank Voltages 12 / 24VDC Selectable Maximum Input Power 520W (24VDC System) / 260W (12VDC System) Input Voltage 16 - 100VDC Max Load Current 20A Dimensions 221(H) x 155(W) x 52(D)mm, 940g Battery support: Sealed, gel or flooded Lead-acid (8~17V/12V; 18~32V/24V) LiFePO4 (12V/24V) LiNiCoMnO2 (12V/24V) Specifications Packaged Volume : 3.35l Packaged Weight : 1.1kg Packaged Length : 24.7cm Packaged Width : 17.6cm Packaged Height : 7.7cm Width : 155mm Height : 221mm Depth : 52mm Weight : 940g DC Voltage : 12V, 24V Max Solar Panel Array : 520W Max PV Open Circuit Voltage : 100V Max Charging Current : 22.5A Max Load Current : 20A Charge Controller Technology : Maximum Power Point Tracking (MPPT)
$199.00 $168.00
Powertech Digitech 0 to 30VDC 0 to 5A Regulated Power supply MP3840
This professional lab power supply offers accurate voltage and current regulation, allowing you to configure precise levels to prevent overheating, burnout, and over-current. Its compact construction, featuring surface mount technology and efficient cooling, provides a highly flexible source. Output is adjustable up to 30VDC and 5A, and the 1mV ripple voltage guarantees precision. Output connections feature banana plug/binding posts and a bright LED display, and the unit is short-circuit protected. Includes a short banana to alligator lead set. Features: Precise voltage level and current limit settings 1mV ripple voltage Avoid overheating, burnout, and over-current Easy-to-use LEDdisplay panel Input voltage: 220-240AC 50-60Hz Output voltage: 0-30VDC adjustable (10mV accuracy) Output current: 0-5A adjustable (1mA accuracy) Ripple current: 3mA Specifications AC Voltage rating: 230V AC Frequency: 50Hz DC current rating: 5A DC Voltage: 30V Length: 270mm Width: 120mm Height: 185mm Weight: 4.8kg Mains Voltage Range: 220V, 240V Frequency: 50Hz Rated for AU Mains: true Rated for US Mains: false Auto-select mains voltage: false Mains Item connection: Standard IEC320 (C13/C14) Mains lead included: true Packaged Volume: 15.62l Packaged Weight: 5.47kg Packaged Length: 30.3cm Packaged Width: 20.7cm Packaged Height: 24.9cm Type of Power Supply: Laboratory Regulation Type: Regulated Voltage Display: true Current Display: true Output Connection: Banana 4mm (standard)Binding Post Terminals Number of Outputs: 1pc Ripple Voltage: 1mV
$239.00 $225.00
DiaMec DiaMec 12V 18Ah SLA Battery SB2490 DM12-18
This SLA Battery from DiaMec offers a reliable 12V nominal voltage and 18Ah capacity that guarantee extended life cycles and powerful performance, making it perfect for powering a variety of electronic devices. Its lightweight design makes it great for caving, camping, or night time fishing, and its sealed design ensures no acid leakage. This battery offers up to 18Ah of power, providing a reliable source of energy for your adventure. With its lightweight design, no acid leakage, and up to 18Ah of power, the DiaMec 12V 18Ah SLA Battery is perfect for powering your outdoor activities for extended periods of time. Enjoy reliable energy wherever your adventures take you. Features Leak proof construction Usable and rechargeable in any position Capable of high discharge rates Deep discharge recovery Wide range of operating temperatures Long service life Specifications Packaged Volume : 3.14l Packaged Weight : 5.04kg Packaged Length : 19cm Packaged Width : 8.8cm Packaged Height : 18.8cm Length : 181mm Height : 167mm Depth : 77mm DC Voltage : 12V Battery usage : Rechargeable Battery Chemical Composition : Sealed Lead Acid (SLA) Battery Peak Current : 270A Amp Hour Rating : 18Ah 20 Hour Capacity : 18Ah 10 Hour Capacity : 17.2Ah 5 Hour Capacity : 15.2Ah 1 Hour Capacity : 10.8Ah Internal Resistance : 15Ω Connection Type : M5 Bolt/Nut Type of battery : SLA Block Recharging Voltage : 14.4V, 15V Standard Recharge Current : 2A Recharging Time : 10hr
$109.00 $99.95
DiaMec DiaMec 12V 12Ah SLA Battery SB2489 DM12-12
These small, sealed SLA batteries are ideal for powering semi-portable devices requiring more power than a D, C, or AA cell can offer for extended periods. Perfect for caving, camping, night fishing...even a lantern on a tinny! Rest assured, this reliable battery won't spill toxic acid thanks to its GEL construction.The amp-hour rating helps you estimate just how long the battery will work before it runs out. Take a 7.2Ah battery, for instance: it can supply 7.2 amps in 1 hour, 3.6 amps in 2 hours, or 1.8 amps in 4 hours. Perfect for powering a lantern!They are ideally charged by solar panels. Leak proof construction Usable and rechargeable in any position Capable of high discharge rates Deep discharge recovery Wide range of operating temperatures Long service life Specifications Packaged Volume : 2.02l Packaged Weight : 3.24kg Packaged Length : 16.1cm Packaged Width : 11cm Packaged Height : 11.4cm Length : 150mm Width : 100mm Height : 93mm DC Voltage : 12V Battery usage : Rechargeable Battery Chemical Composition : Sealed Lead Acid (SLA) Battery Peak Current : 180A Amp Hour Rating : 12Ah 20 Hour Capacity : 12Ah 10 Hour Capacity : 10.8Ah 5 Hour Capacity : 9.6Ah 1 Hour Capacity : 7.2Ah Connection Type : Spade Terminals Type of battery : SLA Block Recharging Voltage : 14.4V, 15V Standard Recharge Current : 1.2A Recharging Time : 12hr
$69.95 $62.95
DiaMec DiaMec 12V 9Ah SLA Battery SB2487 DM12-9
Our SLA DiaMec 12V 9Ah battery SB2487 DM12-9 are small yet powerful sealed lead acid batteries that ensure your semi-portable appliances have the robust power they need for prolonged usage. Perfect for when you go caving or want light during an overnight camping excursion on foot, these batteries don't sacrifice convenience for power - they're neither too heavy nor bulky. Make sure your lantern stays lit for your night fishing expedition, without fear of battery acid (actually a GEL) spilling.The amp-hour rating indicates how long the battery will sustain its power. A 7.2Ah battery can provide 7.2 amps for an hour, 3.6 amps for two hours, and 1.8 amps for four hours! This amount of current is ideal for power-hungry lanterns.They are ideally charged by solar panels. Leak proof construction Usable and rechargeable in any position Capable of high discharge rates Deep discharge recovery Wide range of operating temperatures Long service life Specifications Packaged Volume : 0.48l Packaged Weight : 2.52kg Packaged Length : 15.9cm Packaged Width : 7.3cm Packaged Height : 4.1cm Length : 150mm Width : 65mm Height : 93mm DC Voltage : 12V Battery usage : Rechargeable Battery Chemical Composition : Sealed Lead Acid (SLA) Battery Peak Current : 130A Amp Hour Rating : 9Ah 20 Hour Capacity : 9Ah 10 Hour Capacity : 8.1Ah 5 Hour Capacity : 7.2Ah 1 Hour Capacity : 5.4Ah Connection Type : Spade Terminals Type of battery : SLA Block Recharging Voltage : 13.5V, 14.7V Standard Recharge Current : 900mA Recharging Time : 12hr
$46.95
DiaMec DiaMec SLA Deep-Cycle Gel Battery, 26Ah SB1698 DMD12-26 GEL
The DiaMec SLA Deep-Cycle Gel Battery provides outstanding cyclic performance, with a maximum of 500 cycles at a full depth of discharge. With a capacity of 26Ah, its sealed, maintenance-free design ensures reliable operation, making the DMD12-26 GEL model perfect for deep-cycle applications. This battery is ideal for powering 12V lights, fans, fridges, and more in caravans, RVs, boats, and campsites, as well as trolling motors and lighting in boats. Specifications Packaged Volume : 4.95l Packaged Weight : 8.1kg Packaged Length : 18.6cm Packaged Width : 18.1cm Packaged Height : 14.7cm Width : 166mm Height : 125mm Depth : 175mm Weight : 8.35kg DC Voltage : 12V Battery usage : Rechargeable Battery Chemical Composition : Deep Cycle Gel Cell Battery Peak Current : 260A Amp Hour Rating : 26Ah 20 Hour Capacity : 27.3Ah 10 Hour Capacity : 26Ah 5 Hour Capacity : 21.8Ah 1 Hour Capacity : 16.5Ah Connection Type : M5 Bolt/Nut Type of battery : SLA Block Battery Code : DMD12 - 26 GEL Recharging Voltage : 13.5V, 14.7V Standard Recharge Current : 3A Recharging Time : 20hr
$149.00 $139.00
Powertech Powertech 12/24V 10A Dual Battery PWM Solar Charge Controller, LED Indicator MP3760
Powertech MP3760 – 12/24V 10A Dual Battery PWM Solar Charge Controller The Powertech MP3760 is a reliable and efficient dual battery PWM solar charge controller, designed to manage and optimise power delivery in both 12V and 24V solar systems. With advanced PWM technology and support for dual battery charging, this controller helps maintain battery health and system safety in off-grid, mobile, or RV solar setups. Perfect for large solar arrays and demanding environments, this charge controller features LED status indicators, built-in electronic protections, and a low overnight self-consumption rate to maximise energy efficiency. Key Features: Dual battery charging – charge 2 separate battery banks simultaneously Supports both 12V and 24V systems Highly efficient PWM charging technology Electronic protection against overcharging, short circuits, and reverse polarity LED indicators for easy monitoring of charge and battery status Low standby current draw – only 4mA overnight Recommended panel: ZM9065 14.1A (controller output is panel-limited) Max solar input voltage: 30V (12V) / 55V (24V) Battery voltage range: 8–15V (12V) / 8–30V (24V) Ideal For: Solar power systems with dual battery banks Off-grid cabins and battery backup installations RVs, campervans, and marine systems Remote monitoring setups and mobile solar power systems Product Specifications: Technology: PWM (Pulse Width Modulation) Voltage Support: 12V / 24V systems Max Current Draw: 10A Dimensions: 153 mm (W) x 76 mm (H) x 37 mm (D) Packaged Weight: 0.23 kg Packaged Volume: 0.71 L Self-Consumption: 4mA (overnight)
$69.95 $60.95
Powerhouse Powerhouse 12V 7.2Ah Sealed Lead Acid (SLA) Gel Battery 4.8mm/F1
Powerhouse 12V 7.2Ah Sealed Lead Acid (SLA) Gel Battery – F1 4.8mm High-Capacity Backup Battery for NBN, UPS, Alarms & Communications Systems The Most Common & Trusted SLA Battery Size The Powerhouse 12V 7.2Ah SLA Gel Battery is one of the most widely used sealed lead-acid batteries on the market. It’s a reliable power solution for NBN connection boxes, UPS systems, alarm panels, communications equipment, and emergency backup systems. Designed with fully sealed gel cells, this battery is non-spillable, maintenance-free, and safe for indoor installation when properly ventilated. Fitted with 4.8mm (F1) spade terminals, it allows quick and easy user replacement in most compatible devices. Key Features 12V 7.2Ah Capacity – Ideal for high-demand standby and backup applications Sealed Lead Acid (Gel) Technology – Maintenance-free, leak-proof operation F1 4.8mm Spade Terminals – Industry-standard size for easy replacement UPS-Grade Cells – Selected for reliability and long service life ActivFire Listed (afp3824) – Approved for compliant fire and safety systems IEC Compliant – Meets IEC 60896-21 & IEC 60896-22 standards UN 2800 Rated – Non-spillable, Hazard Class 8 ⚠️ Important: Temperatures above 65°C can affect the ABS housing. Ensure good ventilation and do not install in engine bays. Ideal Applications NBN backup battery replacements UPS (Uninterruptible Power Supply) systems Alarm and security systems Communications and networking equipment Emergency lighting Fire panels and safety systems Technical Specifications General Nominal Voltage: 12V Weight: 2.2kg Dimensions: 151(L) × 65(W) × 100(H) mm (including terminals) Terminal Type: F1 / 4.8mm spade Container Material: ABS Designed Floating Life: 5 years Capacity Ratings 20 Hour Rate (10.5V): 7.2Ah 10 Hour Rate (10.5V): 6.7Ah 1 Hour Rate (9.6V): 4.67Ah Capacity vs Temperature 40°C: 102% 25°C: 100% 0°C: 85% –15°C: 65% Charging & Electrical Internal Resistance: <25mΩ Float Charge Voltage: 13.6–13.8V @ 25°C Temperature compensation: –18mV/°C Cyclic Charge Voltage: 14.5–15.0V @ 25°C Temperature compensation: –30mV/°C Max Charge Current: 2.16A Max Discharge Current: 108A (5 seconds) Why Choose Powerhouse SLA Batteries? Powerhouse SLA batteries are sourced from quality manufacturers and graded for UPS and critical backup applications, where reliability is essential. Compared to cheaper alternatives, they offer better consistency, longer service life, and dependable performance—making them the smart choice for essential power systems.
$34.95 $34.00
