125W Public Address (PA) Power Amplifier A4370A

Description

Choose a power rating based on the wattage needed for each zone in installations where high power zone amplifiers are required. These models are perfect for use in shopping centers, pedestrian areas, public transportation facilities, and convention centers. All models operate on 240V AC and 24V DC for battery backup and use 3 pin balanced XLR (1V) for input. Rear-mounted level control prevents tampering or accidental adjustment.

The design of the circuit includes built-in safeguards in case of over voltage, over current, and over temperature conditions, which are automatically reset once the issue is resolved. Amplifier status is constantly displayed through front panel LEDs, while reliable operation is maintained through on-demand fan cooling. Additionally, a dedicated 24V DC 1A output is available on the rear for powering additional devices.

Features

  • Robust design incorporating latest Mosfet technology
  • Very Low noise and distortion
  • 70V, 100V and 4-16Ω outputs
  • 240V AC or 24V DC operation
  • 24V DC @ 1 Amp output for external devices
  • Multi stage thermally cued fan cooling
  • Output Peak Limited
  • Thermal Overload protected
  • Signal Presence Indicators
  • Fault Indicators
  • Power Status Indicators
  • Rack Mountable (suits 19-inch racks)

Specifications

  • Power: 125 Watt RMS
  • Distortion: < 0.5%, @ 1kHz
  • Frequency response: 50Hz - 15kHz, -3dB
  • Output line: 100V, 70V, or 4 - 16Ω
  • Input sensitivity: 1V balanced
  • Signal to noise ratio: (peak limiting by-passed) > 90 dB
  • Line output: 600Ω balanced, 0dBV, 3 pin XLR
  • Speaker Connection: Screw terminals
  • 24V DC Output: Screw terminals
  • Inputs: 3 pin XLR (500mV)
  • 24V-30V DC power: Screw terminals
  • 240V AC power: IEC power connector
  • Indicators: Mains, 24V DC, Power, Signal presence, Over temp, Over current, Shut down, Peak limiting
  • Current draw: 250mA Standby, 8A Full @ 24V DC
  • Protection: 5A AC and 10A DC fuse
  • Power supply: 240V AC or 24V DC (nominal)
  • Dimensions: 483W x 340D x 88H mm
  • Input Impedance: ~10KΩ

Read more

Product form
💰 You save $10.00 (1% off RRP)

$895.00  $885.00

🔥 Only 4 left DONT miss out
    ⏰ Order now — ships today!
    • Free shipping Australia-wide. Every order over $50. No exceptions.
    • 30-day returns. No hassle. Even if you just changed your mind.
    • Secure checkout. Your payment is encrypted and protected.

    Choose a power rating based on the wattage needed for each zone in installations where high power zone amplifiers are... Read more

    • Secure & safe checkout

      paypal
    American Express Apple Pay Google Pay Mastercard PayPal Shop Pay Visa
    🇦🇺 Aussie Owned 📦 44,000+ Orders Shipped

    Description

    Choose a power rating based on the wattage needed for each zone in installations where high power zone amplifiers are required. These models are perfect for use in shopping centers, pedestrian areas, public transportation facilities, and convention centers. All models operate on 240V AC and 24V DC for battery backup and use 3 pin balanced XLR (1V) for input. Rear-mounted level control prevents tampering or accidental adjustment.

    The design of the circuit includes built-in safeguards in case of over voltage, over current, and over temperature conditions, which are automatically reset once the issue is resolved. Amplifier status is constantly displayed through front panel LEDs, while reliable operation is maintained through on-demand fan cooling. Additionally, a dedicated 24V DC 1A output is available on the rear for powering additional devices.

    Features

    • Robust design incorporating latest Mosfet technology
    • Very Low noise and distortion
    • 70V, 100V and 4-16Ω outputs
    • 240V AC or 24V DC operation
    • 24V DC @ 1 Amp output for external devices
    • Multi stage thermally cued fan cooling
    • Output Peak Limited
    • Thermal Overload protected
    • Signal Presence Indicators
    • Fault Indicators
    • Power Status Indicators
    • Rack Mountable (suits 19-inch racks)

    Specifications

    • Power: 125 Watt RMS
    • Distortion: < 0.5%, @ 1kHz
    • Frequency response: 50Hz - 15kHz, -3dB
    • Output line: 100V, 70V, or 4 - 16Ω
    • Input sensitivity: 1V balanced
    • Signal to noise ratio: (peak limiting by-passed) > 90 dB
    • Line output: 600Ω balanced, 0dBV, 3 pin XLR
    • Speaker Connection: Screw terminals
    • 24V DC Output: Screw terminals
    • Inputs: 3 pin XLR (500mV)
    • 24V-30V DC power: Screw terminals
    • 240V AC power: IEC power connector
    • Indicators: Mains, 24V DC, Power, Signal presence, Over temp, Over current, Shut down, Peak limiting
    • Current draw: 250mA Standby, 8A Full @ 24V DC
    • Protection: 5A AC and 10A DC fuse
    • Power supply: 240V AC or 24V DC (nominal)
    • Dimensions: 483W x 340D x 88H mm
    • Input Impedance: ~10KΩ

    Read more

    Why Zaply works?

    • Same Brands, Better Prices

      Same Brands, Better Prices

      Behringer, TC Electronic, Gator brands you trust at prices the big guys can't match.

    • Dispatched Same Day

      Dispatched Same Day

      Order before 2pm and it ships today. Free over $50.00. No fine print.

    • Talk to Real Humans

      Talk to Real Humans

      Our team uses this gear. Ask us anything straight answers, not scripts.

    • No Marketplace Roulette

      No Marketplace Roulette

      No random sellers, no mystery condition. Direct from our warehouse to you.

    Write a review for 125W Public Address (PA) Power Amplifier A4370A

    Write a review for 125W Public Address (PA) Power Amplifier A4370A

    Recently viewed products

      © 2026 ZAPLY - High Voltage Shopping

        • American Express
        • Apple Pay
        • Google Pay
        • Mastercard
        • PayPal
        • Shop Pay
        • Visa

        Login

        Forgot your password?

        Don't have an account yet?
        Create account